OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Kingston Technology Corp.
A 2 GB DDR3 1600 desktop memory module rated CL11 at 1.50 V unbuffered
This Kingston KVR16N11/2 module provides 2GB of DDR3 memory rated at 1600 MT/s with a CAS latency of CL11. It operates at the standard 1.50V and uses an unbuffered, non-ECC design. The stick is suited for older desktop platforms that still rely on DDR3 technology.
The module plugs directly into a standard DDR3 DIMM socket on a compatible motherboard. Its unbuffered layout means it works with typical consumer chipsets without requiring registered memory support. The single 2GB capacity leaves additional slots free for further upgrades if the board has more than one bank.
At 1600 MT/s and CL11 the module delivers consistent bandwidth during extended workloads rather than only in brief bursts. The 1.50V rating keeps power draw predictable across long sessions. Without ECC it is intended for standard desktop use where error correction is not a requirement.
| Brand | Kingston |
|---|---|
| Model | KVR16N11/2 |
| Capacity | 2GB |
| Speed | DDR3 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| 配送重量 | 0.02 kg |
| 梱包サイズ | 165 × 44 × 13 mm |
CL11 is the rated CAS latency at DDR3 1600; sustained use does not change this timing.
The module has no fan and draws 1.50 V; it adds minimal heat and makes no audible noise.
Yes, the board must accept DDR3 1600 unbuffered non-ECC DIMMs at 1.50 V.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?