暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Single green desktop memory module with gold contacts and black chips

Kingston Technology Corp.

Kingston Technology ValueRAM 1GB DDR 266MHz PC2100 ECC 184-pin

SKU CH-1ND0-BXVKP

A 1GB DDR 266MHz ECC module with 184-pin gold contacts for desktop systems

  • Capacity1GB
  • ECC protection guards data integrity with 128M X 72 architecture
  • 1 GB capacity adds usable memory for legacy desktop systems
  • 266 MHz DDR speed matches PC2100 motherboard specifications
  • 184-pin DIMM form factor fits standard DDR memory slots
  • Rigorously tested module delivers 100-percent compliance to industry standards

Kingston ValueRAM 1GB DDR PC2100 ECC

This Kingston ValueRAM module is a 1GB DDR SDRAM DIMM rated at 266MHz (PC2100). It is built for desktop systems that require 184-pin unbuffered ECC memory. The stick is 100-percent tested to meet industry standard specifications.

Suits legacy desktops needing ECC

This module suits owners of older desktops or workstations that specifically take 184-pin DDR ECC memory. Builders without ECC-capable motherboards, or those needing higher capacities, faster speeds, or multi-module kits, should look at something else.

184-pin ECC DDR interface decides fit

The single specification that decides compatibility is the 184-pin ECC DDR interface running at 2.5V with CL2.5 timing. Only systems designed for this exact electrical and physical standard can use the module.

特長

  • ECC protection guards data integrity with 128M X 72 architecture
  • 1 GB capacity adds usable memory for legacy desktop systems
  • 266 MHz DDR speed matches PC2100 motherboard specifications
  • 184-pin DIMM form factor fits standard DDR memory slots
  • Rigorously tested module delivers 100-percent compliance to industry standards

仕様

Capacity1GB

この商品に関する質問

Does my motherboard need an 184-pin DDR slot that supports ECC for this 1GB module to work?

Yes. The module is an 184-pin unbuffered DIMM with ECC and requires a DDR slot that accepts 128M x 72 ECC memory at 266 MHz.

Can I add this 266 MHz CL2.5 stick alongside slower DDR memory I already have installed?

The system will run all modules at the speed of the slowest stick. This module operates at 266 MHz with CL2.5 timing and 2.5 V.

How do I confirm the module is running at 266 MHz with ECC active after installation?

Check the BIOS or a system-information tool. It should report 1 GB at 266 MHz (PC2100), CL2.5, and show ECC enabled for the 128M x 72 configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。