暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black PCIe 5.0 MCIO x4 male-to-male cable, 1.6ft, 38-pin straight connectors

LetLinkSo

LetLinkSo LLS-CB-1MC1MC-02 PCIe 5.0 MCIO x4 to MCIO x4 cable 1.6ft (50cm)

SKU CH-T0HZ-GKSF6

PCIe 5.0 MCIO x4 male-to-male cable delivers 128 Gbps over four lanes at 32 GT/s with 38-pin SFF-TA-1016 connectors in a 1.6 ft (50 cm) copper assembly

  • TypePCIe 5.0
  • ColorBlack
  • Length1.6 feet(50cm)
  • Connector Number2
  • Connector Detail1 x MCIO x4 to 1 x MCIO x4
  • Terminal GenderMale to Male
  • Delivers PCIe 5.0 bandwidth up to 128 Gbps across four lanes
  • Slim MCIO x4 connectors with 0.6 mm pitch suit high-density server racks
  • Male-to-male 38-pin design preserves signal integrity at 32 GT/s per lane
  • Copper conductors support SAS 4.0 and PCIe 5.0 for multi-protocol compatibility
  • 6 ft (50 cm) length enables tidy routing in compact chassis

PCIe 5.0 MCIO x4 cable for data centres

This LetLinkSo cable connects two MCIO x4 male ports in a straight-through layout. It carries four lanes at 32 GT/s per lane, reaching a theoretical 128 Gbps. The 1.6 ft (50 cm) length suits dense server racks and storage arrays. It is built for SAS 4.0 and PCIe 5.0 equipment.

Signal integrity over copper conductor

The 38-pin SFF-TA-1016 interface uses a 0.6 mm pin pitch to reduce crosstalk and preserve fidelity across the link. Copper conductors handle the 128 Gbps aggregate rate without active components. The black jacket is rated for standard server airflow and operating temperatures.

Four-lane MCIO x4 male-to-male link

This part only works where both endpoints present an MCIO x4 male receptacle and require a PCIe 5.0 or SAS 4.0 x4 connection. It cannot bridge to U.2, U.3, OCuLink, SlimSAS or single-lane ports. Buyers needing longer runs, right-angle exits or different pinouts must source another cable.

特長

  • Delivers PCIe 5.0 bandwidth up to 128 Gbps across four lanes
  • Slim MCIO x4 connectors with 0.6 mm pitch suit high-density server racks
  • Male-to-male 38-pin design preserves signal integrity at 32 GT/s per lane
  • Copper conductors support SAS 4.0 and PCIe 5.0 for multi-protocol compatibility
  • 6 ft (50 cm) length enables tidy routing in compact chassis

仕様

BrandLetLinkSo
ModelLLS-CB-1MC1MC-02
TypePCIe 5.0
ColorBlack
Length1.6 feet(50cm)
Connector Number2
Connector Detail1 x MCIO x4 to 1 x MCIO x4
Terminal GenderMale to Male
Speed32 GT/s (per lane)
Specifications1.6feet (50cm)
ConductorCopper Conductor
FeaturesULTRA-FAST SPEEDS:

この商品に関する質問

How do I connect the straight male SFF-TA-1016 38-pin MCIO x4 connectors, and what step is often missed?

Align the keyed 38-pin MCIO x4 male plugs with the matching female ports on the backplane and controller, then press straight in until the latch clicks; the step often missed is verifying both latches are fully engaged so the 32 GT/s lanes stay seated.

What maintenance or replacement will this copper-conductor MCIO cable need over time?

The copper conductors and UL-listed jacket are rated for continuous operation; inspect the latch tabs and connector housing during scheduled server maintenance and replace the cable only if a latch is broken or the jacket shows cuts.

At what point does signal integrity become the limiting factor during sustained PCIe 5.0 traffic?

The 50 cm length is designed to meet PCIe 5.0 channel-loss budgets at 32 GT/s; the first limit under sustained load is the connector-to-connector insertion-loss margin, not the copper conductors themselves.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。