暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White 120mm reverse-blade case fan 28mm thick with ARGB side strips

Lian Li

Lian Li UNI Fan CL120 ARGB PWM 120mm 28mm White Reverse Blade Single Pack

SKU CH-1RP9-SVGT8

A 28 mm thick 120 mm case fan with fluid dynamic bearing, 2.38 mmH₂O static pressure and dual-zone addressable RGB, supplied without a controller

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness28mm

Model LED Reverse Blade

Option Single Pack

  • 28 mm thickness optimises airflow and static pressure for air and water cooling
  • Dual lighting zones on blades and side strips enable independent RGB customisation via L-Connect 3
  • Fluid dynamic bearing delivers quieter operation and longer lifespan
  • Reverse blade design meets diverse installation needs
  • 4 GHz wireless signal allows PWM and RGB control without extra cables

Single White 120mm Reverse-Blade Fan

This single 120mm case fan uses a 28mm thick reverse-blade design in white finish. It is built for builders who need one extra unit to complete a daisy-chained array or replace a specific position in a radiator stack. The addressable RGB lighting covers both the fan blades and the diffused side strips for dual-zone effects.

Wireless Controller Required

The fan communicates through a 4-pin cable wireless receiver operating on a 2.4 GHz signal, so a separate L-Wireless Sync Controller is mandatory for PWM and RGB control. Without that controller the fan cannot receive speed commands or lighting data from the motherboard or L-Connect 3 software.

Daisy-Chain Installation Notes

Installation relies on the daisy-chain connectors that link multiple fans together before reaching the wireless receiver. The 28mm thickness may interfere with slim radiator brackets or tight side-panel clearance, so verify internal spacing before mounting. The fluid dynamic bearing keeps noise low during long-term operation.

特長

  • 28 mm thickness optimises airflow and static pressure for air and water cooling
  • Dual lighting zones on blades and side strips enable independent RGB customisation via L-Connect 3
  • Fluid dynamic bearing delivers quieter operation and longer lifespan
  • Reverse blade design meets diverse installation needs
  • 4 GHz wireless signal allows PWM and RGB control without extra cables

仕様

BrandLian li
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness28mm
Bearing TypeFluid Dynamic
Air Pressure2.38 mmH2O
ColorWhite
LEDAddressable RGB

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 2.38 mmH2O static pressure deliver in a real build?

It gives strong push-through for dense radiator fins or restrictive front panels while keeping noise lower than thinner fans at the same airflow.

How does the 2.4 GHz wireless link work and what does it cap?

The 4-pin wireless receiver plugs into a motherboard USB header or rear I/O and carries PWM speed control plus ARGB data; it tops out at the 2.4 GHz band so it avoids Bluetooth or Wi-Fi channels.

Will the 28 mm thick 120 mm frame fit my case or radiator?

The 28 mm depth needs a mount with at least 28 mm clearance; standard 120 mm hole spacing is used, so any case or radiator that accepts 28 mm fans will take it.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。