暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular laser engraver with 3.5 inch touch screen on open frame bed

LONGER

LONGER RAY5 10W laser engraver 0.06mm spot 3.5" touch screen 15.7" bed

SKU CH-118H-GXQ52

A 10 W laser engraver with a 0.06 mm spot, 3.5" touch screen for offline control, and a 15.7" bed for wood and metal

Option 10W

  • Ultra-fine 0.06mm spot for precise engraving and cutting
  • 5 inch touch screen enables offline operation without a computer
  • Wi-Fi USB APP and TF card transfer for flexible data handling
  • One computer controls multiple engravers for parallel production
  • Works with over 1000 materials for diverse DIY projects

Laser engraver for DIY makers

The LONGER RAY5 10W laser engraver is built for hobbyists and small workshops that need precise marking on wood, metal and other materials. Its ultra-fine 0.06mm spot delivers thinner lines and clearer texture than standard modules. The 15.7in by 15.7in work bed gives ample room for larger projects without re-positioning.

Touch-screen and wireless workflow

A 3.5in colour touch screen enables offline engraving and cutting with no computer attached. Files can be sent via Wi-Fi, USB cable, app or TF card, so the machine can operate anywhere in the workshop. One computer can drive multiple units in parallel, letting a single operator run several engravers at once.

Sustained cutting consistency

The compressed-spot optics keep the beam tight over long jobs, so detail stays sharp from the first pass to the last. Offline operation removes the risk of a host-computer crash interrupting a multi-hour run. Builders who need a fully enclosed safety cabinet or an integrated air-assist system should look elsewhere.

特長

  • Ultra-fine 0.06mm spot for precise engraving and cutting
  • 5 inch touch screen enables offline operation without a computer
  • Wi-Fi USB APP and TF card transfer for flexible data handling
  • One computer controls multiple engravers for parallel production
  • Works with over 1000 materials for diverse DIY projects

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How long can the 10 W laser run before the spot quality degrades?

The 10 W module uses compressed spot technology to keep a 0.06 mm focus; sustained use does not change the optical specification.

What are the noise and heat levels when the machine engraves continuously all day?

The 3.5" touch screen and Wi-Fi let you operate the engraver remotely, so you can place it away from your workspace while it runs.

What extra hardware must I already own to start engraving with the 15.7" bed?

Files can be sent via USB cable, Wi-Fi, TF card or the mobile APP, so a computer is optional for basic operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。