暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square LCD HAT on Raspberry Pi GPIO header, 1.3 inch 240x240 IPS screen

LORDWORLD

LORDWORLD 1.3inch IPS LCD Display HAT 240x240 Raspberry Pi

SKU CH-HR4F-AJA9F

1.3 inch IPS LCD HAT adds a 240x240 SPI display to Raspberry Pi Zero, 2B, 3B and 3B+ models

  • Compact 1.3 inch display adds a control interface to your Pi
  • 240x240 pixel resolution delivers high definition in a small footprint
  • IPS panel provides wide viewing angles for clear visibility
  • SPI communication with embedded controller simplifies integration
  • Compatible with Raspberry Pi Zero, Zero W, Zero WH, 2B, 3B and 3B+ via standard GPIO

Compact Raspberry Pi Display HAT

This 1.3inch IPS LCD HAT adds a 240x240 pixel colour screen to compatible Raspberry Pi boards. It is designed for makers who need a small visual interface for embedded projects, status readouts or portable devices. The embedded controller handles the panel directly, keeping the hardware footprint minimal.

Simple SPI Connection and GPIO Alignment

The HAT uses the standard Raspberry Pi GPIO header and communicates over the SPI interface, so no extra wiring or soldering is required for supported models. Alignment pins match the 40-pin header on Zero, Zero W, Zero WH, 2B, 3B and 3B+ boards; older 26-pin models and newer 40-pin revisions beyond 3B+ are not supported, so the HAT will not seat or function on those platforms.

240x240 Resolution Decides Fit

The fixed 240x240 pixel resolution determines how much information can be shown at once; it suits simple menus, sensor dashboards or logo screens but cannot render detailed graphics or readable small text. If your application needs higher pixel density or a larger viewing area, this panel will not meet the requirement.

特長

  • Compact 1.3 inch display adds a control interface to your Pi
  • 240x240 pixel resolution delivers high definition in a small footprint
  • IPS panel provides wide viewing angles for clear visibility
  • SPI communication with embedded controller simplifies integration
  • Compatible with Raspberry Pi Zero, Zero W, Zero WH, 2B, 3B and 3B+ via standard GPIO

仕様

BrandLORDWORLD

この商品に関する質問

How can I verify the 1.3inch IPS LCD HAT is working after connecting it to my Raspberry Pi via SPI?

Run a test script that initialises the SPI bus and sends a simple image to the 240x240 panel; the IPS screen should show the image with a wide viewing angle.

What comes in the box with the LORDWORLD 1.3inch IPS LCD Display HAT and what must I supply separately?

The HAT itself is included; you must provide a compatible Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ and any mounting hardware.

Which version of the LORDWORLD 1.3inch IPS LCD Display HAT should I choose for my Raspberry Pi model?

Choose this single 240x240 SPI version; it is compatible with Raspberry Pi Zero, Zero W, Zero WH, 2B, 3B and 3B+.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。