暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small 1.3 inch OLED display module on a development board, black and white 64 by 128 pixels, SH1107 driver, SPI and I2C interfaces

LORDWORLD

LORDWORLD 1.3inch OLED Display Module 64x128 SH1107 development board

SKU CH-JDED-YEM92

Compact 1.3 inch OLED module with 64 by 128 resolution, SH1107 driver, SPI and I2C interfaces, plus Raspberry Pi and STM32 examples

  • 3 inch OLED panel delivers sharp 128 x 64 pixel graphics
  • Embedded SH1107 driver enables fast 4-wire SPI and I2C communication
  • Dual interface support gives flexible MCU integration options
  • Ready-to-use code examples accelerate Raspberry Pi and STM32 development
  • Compact module suits space-constrained IoT edge projects

1.3inch OLED Display Module

This 1.3inch OLED display module provides a 64x128 pixel resolution using an embedded SH1107 driver. It supports both 4-wire SPI and I2C interfaces for flexible integration. Development resources with examples for Raspberry Pi and STM32 platforms are included. The board is designed for IoT edge device prototyping and maker projects.

Makers needing compact monochrome output

Developers building portable instruments or status displays benefit from the small form factor and dual-interface support. Projects requiring colour graphics or higher pixel density should consider alternative display technologies. The module suits embedded systems where a self-emissive panel simplifies backlight design.

SH1107 driver with SPI and I2C

The SH1107 controller handles all panel timing and provides a choice of serial interfaces. This compatibility reduces host-pin count and firmware complexity for supported microcontrollers. Verify that your target platform can drive either bus at the required speed before purchase.

特長

  • 3 inch OLED panel delivers sharp 128 x 64 pixel graphics
  • Embedded SH1107 driver enables fast 4-wire SPI and I2C communication
  • Dual interface support gives flexible MCU integration options
  • Ready-to-use code examples accelerate Raspberry Pi and STM32 development
  • Compact module suits space-constrained IoT edge projects

仕様

BrandLORDWORLD

この商品に関する質問

Does the module ship with any cables or headers, or must they be sourced separately?

The board arrives with the SH1107 driver and dual SPI / I2C pads already fitted; no cables, jumper wires or pin headers are included, so you will need to supply your own connections.

Should I pick the SPI or I2C interface for my project?

Both 4-wire SPI and I2C are available on the same board; choose SPI for higher throughput or I2C when pin count is limited — either works with the supplied examples.

What does the 64x128 resolution mean for text and graphics on the 1.3 inch panel?

The 64 by 128 pixel grid gives a compact monochrome canvas suited to status lines, simple menus or small icons; fine detail is limited by the low pixel count.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。