暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square 1.85 inch touch LCD development board with 360x360 display and pin headers

LORDWORLD

LORDWORLD 1.85inch Touch LCD Module 360x360 QSPI ST77916 development board

SKU CH-B0BP-MHVYX

A 1.85 inch capacitive touch LCD module with 360×360 resolution and 262K colors, using QSPI display and I2C touch interfaces plus 3.3V/5V compatibility for ESP32-S3.

  • 85 inch display with 360×360 resolution and 262K colours for sharp embedded GUI visuals
  • QSPI display plus I2C touch interface reduces IO pin count on the host controller
  • CST816S capacitive touch controller gives fast responsive interaction for HMI prototypes
  • Onboard level shifting allows direct 3.3V or 5V power input across development platforms
  • Ready examples for ESP32-S3, Raspberry Pi Pico and STM32 accelerate GUI and prototype development

Compact Touch Display for Embedded GUI

The LORDWORLD 1.85inch Touch LCD Module delivers a 360×360 resolution with 262K colours on a 1.85inch panel. It uses a QSPI display interface and I2C touch control via the CST816S controller. The ST77916 driver handles rendering while onboard voltage translation accepts 3.3V or 5V logic levels. Online examples support ESP32-S3, Raspberry Pi Pico and STM32 development workflows.

Stable Operation During Continuous Rendering

The QSPI bus sustains steady frame updates without the bandwidth limits of slower serial links. The CST816S touch controller maintains consistent scan rates during prolonged interaction sessions. Onboard level shifting keeps signal integrity intact across 3.3V and 5V hosts, preventing timing drift that can appear on extended runs. The ST77916 driver manages internal refresh cycles without host intervention, freeing the MCU for application logic.

Upgrade from Basic Character or Monochrome Panels

This module replaces character LCDs or low-colour OLEDs when a project needs full-colour graphics and capacitive touch in the same footprint. The jump is worthwhile when the UI requires icons, sliders or animated transitions that monochrome displays cannot render. It is not suited for applications needing larger viewing areas, higher pixel counts or video-rate playback beyond the QSPI throughput. Developers without QSPI-capable MCUs should verify peripheral availability before integrating.

特長

  • 85 inch display with 360×360 resolution and 262K colours for sharp embedded GUI visuals
  • QSPI display plus I2C touch interface reduces IO pin count on the host controller
  • CST816S capacitive touch controller gives fast responsive interaction for HMI prototypes
  • Onboard level shifting allows direct 3.3V or 5V power input across development platforms
  • Ready examples for ESP32-S3, Raspberry Pi Pico and STM32 accelerate GUI and prototype development

仕様

BrandLORDWORLD

この商品に関する質問

Does the 1.85inch ST77916 display run hot or draw much current when driven continuously at 360×360?

The module operates from 3.3V or 5V with onboard voltage translation and uses a low-pin-count QSPI interface, keeping heat and power draw modest during all-day GUI or HMI operation.

Which controller board and wiring do I need before the CST816S touch panel and QSPI display will work?

You need a host such as an ESP32-S3, Raspberry Pi Pico or STM32 that can drive QSPI for video and I2C for touch, plus jumper wires or a matching header to connect the module's interface pins.

Will this 360×360 QSPI module work alongside an older 3.3V-only MCU board I already have?

Yes, the onboard level shifting accepts 3.3V or 5V logic, so it can connect directly to legacy 3.3V microcontrollers without extra translator chips.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。