暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

LORDWORLD

LORDWORLD 2.13" Touch E-Paper Development Board 250×122 40-Pin

SKU CH-BF62-K64MV

A 2.13" capacitive touch e-Paper display with 250×122 resolution, 5-point touch, gesture wake-up and a 40-pin GPIO header for Raspberry Pi Zero boards

  • 13" capacitive touch e-Paper display with 5-point touch and 250×122 pixels
  • E-ink display keeps last content visible without power or backlight
  • Ultra-low power consumption draws energy only during screen refresh
  • Wake-up by user-defined gesture enables interactive low-power applications
  • Standard 40-pin GPIO header fits Raspberry Pi Zero and Zero W

Compact E-Paper Touch Board

The LORDWORLD 2.13" development board combines a 250×122 pixel capacitive e-Paper panel with a standard 40-pin GPIO header. It targets Raspberry Pi Zero and full-size Pi models for low-power visual projects that need touch input without a backlight.

Gesture Wake And Persistent Image

The display retains the last shown content indefinitely after power is removed, and it can wake from sleep on a user-defined gesture. Only screen refreshes draw measurable current, so battery-operated prototypes can run for extended periods on small cells.

Makers Building Low-Power UIs

Suits developers creating always-visible dashboards, e-reader prototypes or sensor readouts that must stay readable in direct sunlight. Not for projects needing colour, video-rate animation or high-resolution graphics beyond the 250×122 pixel grid.

特長

  • 13" capacitive touch e-Paper display with 5-point touch and 250×122 pixels
  • E-ink display keeps last content visible without power or backlight
  • Ultra-low power consumption draws energy only during screen refresh
  • Wake-up by user-defined gesture enables interactive low-power applications
  • Standard 40-pin GPIO header fits Raspberry Pi Zero and Zero W

仕様

BrandLORDWORLD

この商品に関する質問

Will the 40-pin GPIO header need replacement after repeated Pi swaps?

The 40-pin header is a standard through-hole connector rated for many insertion cycles; normal development use will not wear it out.

What limits how often the 250×122 e-Paper can refresh during sustained operation?

The display only draws power during refresh, so the practical limit is the e-ink panel's refresh timing, not thermal throttling.

How much heat or noise does the 2.13" touch e-Paper produce when running all day?

It has no backlight or active cooling, so it generates no audible noise and negligible heat while displaying a static image.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。