暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular 2.9 inch e-paper HAT with red black white display for Raspberry Pi Pico

LORDWORLD

LORDWORLD 2.9inch E-Paper Display Module (B) HAT 296×128 for Raspberry Pi Pico

SKU CH-NP95-95M7M

A 2.9 inch e-paper HAT for Raspberry Pi Pico shows 296×128 pixels in red, black and white without backlight, retains images after power loss and draws power only during refresh over SPI

  • Retains image without power thanks to zero-backlight e-paper
  • Ultra-low consumption draws energy only during screen refresh
  • SPI connection uses minimal GPIO pins on Pico
  • Three-colour 296×128 panel shows red, black and white
  • Compact 2.9 inch HAT plugs directly onto Raspberry Pi Pico

What it is

The LORDWORLD 2.9inch E-Paper Display Module (B) HAT provides a 296×128 pixel red, black and white screen that plugs directly onto a Raspberry Pi Pico. It uses an SPI interface that needs only a few IO pins, leaving the rest free for sensors or other peripherals. With no backlight, the last image stays visible for a long time after power is removed, making it suitable for low-duty-cycle readouts.

Compatibility check

Verify that your Pico has the SPI pins exposed and that your project can allocate the required IO lines for the display. The module draws power only during refresh cycles, so confirm your power budget can supply the brief current spikes when updating the screen. No backlight driver or extra voltage rails are needed, simplifying the wiring.

Thermals and power

Because the panel consumes power only while refreshing, heat output is negligible during static display periods. There are no active cooling components, so the board runs silently in normal use. Overall energy draw remains very low, allowing extended operation from small batteries or USB power without thermal concerns.

特長

  • Retains image without power thanks to zero-backlight e-paper
  • Ultra-low consumption draws energy only during screen refresh
  • SPI connection uses minimal GPIO pins on Pico
  • Three-colour 296×128 panel shows red, black and white
  • Compact 2.9 inch HAT plugs directly onto Raspberry Pi Pico

仕様

BrandLORDWORLD

この商品に関する質問

Does the module ship with a Raspberry Pi Pico included or must I buy the board separately?

The HAT plugs directly onto a Raspberry Pi Pico; the Pico itself is not included and must be purchased separately.

Which resolution variant should I choose for this display?

This module has a single 296×128 pixel resolution; no other resolution option is offered for this model.

How long does the 296×128 red/black/white image remain visible after power is removed?

With no backlight the last refreshed content stays visible indefinitely until the next SPI update.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。