暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal caddy holding two 2.5 drives in a 3.5 bay

LORDWORLD

LORDWORLD 2-Bay 2.5 SAS/SATA Mobile Rack for 3.5 Bay ExpressCage MB742SP-B

SKU CH-TKXN-YP9GP

Holds two 2.5 SAS or SATA drives in a single 3.5 bay with passive cooling and power-on-per-drive caddies

  • Rugged metal housing and ABS caddies protect two drives
  • Fits two 2.5 SAS/SATA SSDs or HDDs in a single 3.5 bay
  • Multi-Flow Technology delivers passive cooling for installed drives
  • Active Power Technology spins up only bays that contain a drive
  • Supports 5 mm, 7 mm and 9.5 mm drive heights

Dual 2.5 SAS/SATA to 3.5 bay adapter

The LORDWORLD ExpressCage MB742SP-B mounts two 2.5-inch SAS or SATA drives into one external 3.5-inch floppy bay. Rugged metal housing and ABS caddies secure 5 mm, 7 mm and 9.5 mm height drives. Active Power Technology spins a bay only when a drive is present.

Upgrade from single-drive brackets

Replaces older single-drive 3.5 bay caddies when you need twice the capacity in the same opening. The jump is worth it for servers or workstations that must add hot-swap SAS or SATA storage without sacrificing additional front-panel slots.

Sustained passive cooling

Multi-Flow Technology moves air through the metal frame to dissipate heat during continuous read or write workloads. No fan is fitted, so acoustic output stays at zero while drive temperatures remain stable over long sessions.

特長

  • Rugged metal housing and ABS caddies protect two drives
  • Fits two 2.5 SAS/SATA SSDs or HDDs in a single 3.5 bay
  • Multi-Flow Technology delivers passive cooling for installed drives
  • Active Power Technology spins up only bays that contain a drive
  • Supports 5 mm, 7 mm and 9.5 mm drive heights

仕様

BrandLORDWORLD

この商品に関する質問

What drive heights does the MB742SP-B caddy accept?

The caddies accommodate 2.5 SAS or SATA drives measuring 5 mm, 7 mm or 9.5 mm in height.

How is the unit mounted in a 3.5 external bay?

Slide the metal housing into the floppy bay, secure it with the case screws, then insert each drive into its ABS caddy until the SATA connector seats fully.

Which parts may need replacement after extended use?

The ABS drive caddies and the internal SATA backplane connectors are the components most likely to wear over time.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。