暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver aluminium RC servo with 25T horn and metal brackets

LORDWORLD

LORDWORLD 20KG RC Servo 25T Horn 180° 6.6V

SKU CH-Z2WS-GEKVZ

High-torque digital servo delivers 20 kg·cm at 6.6 V with full metal gears, aluminium case, dual ball bearings and 180° rotation

  • 20 kg·cm torque at 6.6 V powers heavy RC models
  • Full metal gears increase accuracy and extend service life
  • Aluminium case improves heat dissipation for sustained operation
  • Dual ball bearings reduce friction and support smooth rotation
  • 180° controllable angle suits steering and robotic joints

20 kg·cm Torque Servo

The LORDWORLD servo delivers 20 kg·cm of torque at 6.6 V, making it suitable for RC cars, robots and DIY projects that demand strong, precise actuation. Its 180 degree controllable range and 25T spline interface provide broad compatibility with standard horns and linkages.

Upgrading from Plastic Gear Units

This servo replaces lower torque or plastic geared servos when a build requires full metal gears, dual ball bearings and an aluminium case for heat dissipation. The jump is worth it when the application involves sustained loads or vibration that would strip or overheat a lesser unit.

Check Voltage and Mounting Space

Verify that your power supply can deliver a stable 6.6 V and that the 40 by 20 by 40.5 mm footprint fits your chassis. Confirm the 25T spline matches your existing horns or plan to use the two included metal horns and brackets.

特長

  • 20 kg·cm torque at 6.6 V powers heavy RC models
  • Full metal gears increase accuracy and extend service life
  • Aluminium case improves heat dissipation for sustained operation
  • Dual ball bearings reduce friction and support smooth rotation
  • 180° controllable angle suits steering and robotic joints

仕様

BrandLORDWORLD

この商品に関する質問

What are the exact dimensions I need to clear for the 40*20*40.5mm aluminium case?

The servo body measures 40 mm wide, 20 mm deep and 40.5 mm tall; allow a few millimetres extra around the output shaft for the 25T horn and the two included metal brackets.

Which step do builders most often skip when fitting the 25T horn onto the output shaft?

Align the horn splines with the 25-tooth shaft, press it fully home, then secure the retaining screw before connecting any linkage — skipping the screw lets the horn slip under the 20 kg·cm torque.

What part of this servo will need attention first after heavy use at 6.6V?

The dual ball bearings (one driving, one support) and the full metal gear train handle the 277.6 oz·in load, so inspect the bearings for play and re-grease the gears if the 180° rotation develops stiffness.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。