暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact silver servo with black horn and cable, aluminum casing, IP66 waterproof rating

LORDWORLD

LORDWORLD 25KG 180° IP66 Waterproof Coreless Servo Motor development board

SKU CH-ATWZ-3P5XN

High-torque coreless servo with 25 kg torque, 180° rotation, IP66 waterproofing, and Arduino, STM32, Raspberry Pi, C51 and Scratch compatibility

  • Delivers strong 25KG torque for demanding RC applications
  • IP66 sealed design ensures reliable operation in wet conditions
  • High-speed coreless motor achieves fast 180° response
  • Compact 1.57×0.78×1.59 in aluminium casing aids heat dissipation
  • Compatible with Arduino, C51, STM32, RPi and Scratch platforms

High-torque servo for RC and robotics

The LORDWORLD coreless servo delivers 25 kg of torque through a 180-degree range. It fits 1/10, 1/12, 1/8 and 1/6 scale cars, boats, planes and custom robot builds. An IP66-rated sealed housing with dual bearings keeps water and dust out during outdoor use.

Programming platforms and control limits

The board works with Arduino, C51, STM32, Raspberry Pi and Scratch environments. Tutorials are supplied for each platform. The servo horn uses a 25-tooth spline, so only horns or arms with the same tooth count will mesh correctly. Travel is fixed at 180 degrees.

Power and mounting checks before ordering

Verify that your power supply can sustain the stall current implied by the 45 kg peak torque rating. The aluminium case measures 1.57 by 0.78 by 1.59 inches; confirm this footprint fits your chassis. No alternative spline sizes or continuous-rotation firmware are offered.

特長

  • Delivers strong 25KG torque for demanding RC applications
  • IP66 sealed design ensures reliable operation in wet conditions
  • High-speed coreless motor achieves fast 180° response
  • Compact 1.57×0.78×1.59 in aluminium casing aids heat dissipation
  • Compatible with Arduino, C51, STM32, RPi and Scratch platforms

仕様

BrandLORDWORLD

この商品に関する質問

Which torque rating should I pick for a 1/10 scale robot project?

The servo is rated at 25KG torque at standard voltage and reaches 45KG at higher input, covering 1/6, 1/8, 1/10 and 1/12 scale models with a single version.

What does the 180° control angle mean when the servo is mounted in a chassis?

The output shaft rotates through a full 180° range, giving half-circle motion for steering arms or robotic joints without mechanical stops limiting travel.

Does the IP66 rating protect the motor during full immersion?

IP66 certifies protection against powerful water jets and dust ingress; it is not rated for continuous submersion, so avoid deep-water use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。