暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular board with 1.14 inch colour screen in plastic case

LORDWORLD

LORDWORLD ESP32-GEEK development board S3R2 1.14inch 65K LCD 16MB Flash

SKU CH-7VJK-JPDSX

Compact IoT board with 1.14 inch 65K colour LCD, 16MB Flash, Wi-Fi and BLE for rapid prototyping

  • Dual-core 240 MHz processor handles demanding IoT tasks
  • 16 MB Flash plus 2 MB PSRAM stores large firmware
  • 14 inch 65K colour IPS LCD shows vivid graphics
  • Wi-Fi up to 150 Mbps and Bluetooth 20 dBm ensure strong links
  • UART, GPIO and I2C headers plus case simplify prototyping

Compact IoT board for ESP32-S3R2 projects

The LORDWORLD ESP32-GEEK board targets hobbyists and engineers building Wi-Fi or Bluetooth LE devices with a built-in display. It integrates an Xtensa 32-bit LX7 dual-core processor running at 240 MHz, 512KB SRAM, 384KB ROM, 2MB PSRAM and 16MB Flash. The 1.14inch 240×135 pixel 65K colour IPS LCD provides immediate visual feedback without extra wiring. Integrated 2.4GHz Wi-Fi and BLE share one antenna through an internal coexistence mechanism.

Plug-and-play with headers and case

A plastic case and cables are included so the board can be used straight from the package. The 3-pin UART port, 3-pin GPIO header and 4-pin I2C port use standard pitch connectors that accept common jumper wires. No soldering is required for basic experiments, though the small header spacing may challenge users with limited dexterity. Online open-source demos and resources reduce the time needed to get a first sketch running.

Steady wireless throughput under load

The Wi-Fi radio operates in 1T1R mode with a maximum PHY rate of 150 Mbps and supports Station, SoftAP and combined Station + SoftAP modes. Bluetooth LE runs in a high-power 20dBm mode for extended range. The internal coexistence scheme arbitrates the shared antenna so sustained Wi-Fi traffic does not starve BLE connections. The dual-core processor and on-chip PSRAM keep the system responsive during continuous data logging or streaming tasks.

特長

  • Dual-core 240 MHz processor handles demanding IoT tasks
  • 16 MB Flash plus 2 MB PSRAM stores large firmware
  • 14 inch 65K colour IPS LCD shows vivid graphics
  • Wi-Fi up to 150 Mbps and Bluetooth 20 dBm ensure strong links
  • UART, GPIO and I2C headers plus case simplify prototyping

仕様

BrandLORDWORLD

この商品に関する質問

How can I verify the ESP32-S3R2 board is working after connecting the 1.14 inch 240×135 LCD?

Power the board via USB-A; the 65K colour IPS display should light up and show the demo graphics from the open-source examples, confirming the dual-core processor, 16MB Flash and 2MB PSRAM are initialised correctly.

What ships in the box and what must I source myself?

The package includes the development board, a plastic enclosure, and the necessary cables for the 3-pin UART, 3-pin GPIO header and 4-pin I2C port; you only need to provide a USB-A power supply and a host computer for programming.

Which on-board memory configuration does this model provide?

This version comes with 16MB of Flash storage, 512KB SRAM, 384KB ROM and 2MB of on-chip PSRAM paired with the ESP32-S3R2 controller running at 240 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。