暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
LORDWORLD HX-30HM serial bus servo motor with magnetic encoder

LORDWORLD

LORDWORLD HX-30HM 10KG Serial Bus Servo 12-bit 360°

SKU CH-RJDQ-0TR06

A 10 kg serial bus servo with a 12-bit magnetic encoder delivers 360° precise control, real-time feedback, and multi-controller support for robotics projects

  • Precise 360° control via 12-bit magnetic encoder
  • Real-time angle, temperature and voltage feedback with protections
  • Serial bus connection with ID recognition and dual-mode control
  • Source code and protocols for ESP32, STM32, Arduino, Raspberry Pi and Jetson
  • Visual PC software for servo scanning and parameter configuration

High-Precision 12-bit Magnetic Encoder

The LORDWORLD HX-30HM servo motor uses a 12-bit magnetic encoder with trapezoidal acceleration, deceleration and PID control. It delivers 360° precise control with zero backlash and smooth operation. Real-time angle, temperature and voltage feedback is provided alongside anti-stall, overheat, overload and overvoltage protection.

Suited for Multi-DOF Robotics Development

Developers building multi-degree-of-freedom robots with ESP32, STM32, Arduino, Raspberry Pi or Jetson controllers will benefit from serial bus connection, ID recognition and dual-mode control. Visual PC software supports servo scanning, parameter configuration and motion mode switching. Builders needing higher torque or a different form factor should look elsewhere.

Integrates via Serial Bus with Open-Source Support

The servo connects through a serial bus and includes source code and protocols for major embedded platforms. Compatibility with LeRobot, LeKiwi and OpenDuck Robotics projects simplifies integration into existing frameworks. Comprehensive tutorials, code examples and debugging tools reduce development time for hardware innovation.

特長

  • Precise 360° control via 12-bit magnetic encoder
  • Real-time angle, temperature and voltage feedback with protections
  • Serial bus connection with ID recognition and dual-mode control
  • Source code and protocols for ESP32, STM32, Arduino, Raspberry Pi and Jetson
  • Visual PC software for servo scanning and parameter configuration

仕様

BrandLORDWORLD

この商品に関する質問

What controller board do I need to run the HX-30HM servo on its serial bus?

The servo provides source code and protocols for ESP32, STM32, Arduino, Raspberry Pi, and Jetson controllers, so any of those boards with a serial bus interface will work.

Can I daisy-chain the HX-30HM with older servos that use a different protocol?

The HX-30HM uses ID recognition on a serial bus; older servos with a different protocol cannot share the same bus without a separate converter or controller channel.

How do I verify the 12-bit magnetic encoder is reporting position correctly after wiring?

Use the supplied PC software to scan the servo ID, then command a 360° move and watch the real-time angle feedback match the requested position with zero backlash.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。