暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

LORDWORLD

LORDWORLD RS232 RS485 Ethernet Converter Development Board

SKU CH-FXGE-KVBGP

Converts dual RS232 and RS485 serial ports to 10/100M Ethernet with a 32-bit ARM processor at 120MHz, supporting Modbus and Websocket for bi-directional transparent data transmission

  • M4 series 32-bit ARM processor at 120MHz delivers fast, reliable edge performance
  • 10/100M Auto-MDI/MDIX Ethernet removes cable-type hassles for quick network setup
  • Independent RS232 and RS485 ports run simultaneously without mutual interference
  • Configurable 600 to 230.4Kbps baud rate with five parity options fits diverse serial gear
  • Modbus, Websocket and custom heartbeat packets enable robust industrial data collection

LORDWORLD RS232 RS485 Ethernet Converter

This industrial-grade development board bridges legacy serial equipment to modern Ethernet networks using a 32-bit ARM processor running up to 120MHz. It provides dual RS232 and RS485 ports that operate simultaneously without interference. The 10/100M Auto-MDI/MDIX interface accepts both crossover and straight-through cables for flexible installation.

Engineers integrating Modbus sensors or legacy PLCs

Teams needing wireless connectivity or Power over Ethernet should evaluate alternative modules, as this unit requires a wired 10/100M link and external power. Projects demanding fibre uplinks, Wi-Fi, or cellular backhaul fall outside the capabilities of this specific converter.

Dual independent serial ports on one Ethernet link

The RS232 and RS485 interfaces function at the same time with configurable baud rates from 600bps to 230.4Kbps and five parity options. This single specification determines whether the board can replace two separate converters in your architecture.

特長

  • M4 series 32-bit ARM processor at 120MHz delivers fast, reliable edge performance
  • 10/100M Auto-MDI/MDIX Ethernet removes cable-type hassles for quick network setup
  • Independent RS232 and RS485 ports run simultaneously without mutual interference
  • Configurable 600 to 230.4Kbps baud rate with five parity options fits diverse serial gear
  • Modbus, Websocket and custom heartbeat packets enable robust industrial data collection

仕様

BrandLORDWORLD

この商品に関する質問

What power supply voltage and connector does the board require?

The board needs a 5 V DC supply connected to its onboard power jack; the exact connector type is shown in the product photos.

Can the 10/100M Ethernet port talk to a 10 Mbps hub?

Yes, the Auto‑MDI/MDIX 10/100M interface negotiates down to 10 Mbps half‑ or full‑duplex automatically.

How do I confirm the RS232 and RS485 ports are passing data?

Open the built‑in web configuration page, enable WebSocket mode, and watch the live TX/RX counters for each serial port.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。