暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with pin headers and screw terminals

LORDWORLD

LORDWORLD Serial Bus Servo Driver Board for Raspberry Pi Jetson Nano 253 Servos 12.6V

SKU CH-J0XH-BN2K1

UART serial bus driver board controls up to 253 ST/SC servos simultaneously with 9 to 12.6 V input for Raspberry Pi and Jetson Nano projects

  • Controls up to 253 servos simultaneously with sufficient power
  • Wide 9–12.6 V input range matches servo voltage needs
  • Integrates control circuit for stable serial bus operation
  • Compact design fits space-constrained Raspberry Pi projects
  • Connects to host or MCU for flexible servo control

253-Servo UART Driver Board

This LORDWORLD board connects a host computer or microcontroller to ST and SC series serial bus servos. It is designed for Raspberry Pi and Jetson Nano platforms and integrates the power supply and control circuitry onto a compact PCB. The board suits robotics and automation projects that need many servos driven from a single UART link.

Sustained Multi-Servo Operation

The board can address up to 253 servos simultaneously when a sufficient external power source is provided. Stable operation depends on matching the 9 to 12.6 V input voltage to the servo specifications. The integrated control circuit maintains signal integrity during continuous multi-axis movement.

UART Bus Voltage Constraint

Communication runs over a single UART serial bus, so bandwidth is shared across all connected servos. The 12.6 V maximum input sets a hard ceiling on servo voltage compatibility. Builders who need more servos than the address space allows or a different voltage range must choose another control method.

特長

  • Controls up to 253 servos simultaneously with sufficient power
  • Wide 9–12.6 V input range matches servo voltage needs
  • Integrates control circuit for stable serial bus operation
  • Compact design fits space-constrained Raspberry Pi projects
  • Connects to host or MCU for flexible servo control

仕様

BrandLORDWORLD

この商品に関する質問

How much heat or noise does the board generate when driving 253 servos continuously?

The board integrates the control circuit for stable operation, but heat and noise levels depend on the total servo load and the cooling in your enclosure.

Which host board and power supply do I need before this driver will work?

You need a Raspberry Pi or Jetson Nano as the host and a 9–12.6 V supply that matches the voltage rating of your ST/SC series servos.

Can I keep using my existing ST/SC serial bus servos with this driver?

Yes, the board is designed for ST/SC series serial bus servos and can address up to 253 of them on the same UART bus.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。