暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey thermal paste in a white 50g can with green branding

Maxtor Thermal

Maxtor Thermal GL L Thermal Paste 10.5W/mK 50g

SKU CH-QW9S-51TET

High-conductivity 10.5W/mK thermal paste in a 50g can for CPU, GPU and console heatsink maintenance

  • Volume / Net Weight50g
  • Thermal Conductivity10.5W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsGEL canned thermal paste can be purchased at an extremely lo
  • 5 W/mK conductivity moves heat fast from CPU and GPU cores
  • 50 g syringe supplies enough paste for several builds or re-applications
  • Non-conductive formula removes short-circuit risk around sensitive components
  • Stable from -50 °C to 250 °C for reliable long-term operation
  • Smooth gel texture spreads easily by finger or scraper

50 g syringe for CPUs and consoles

This thermal compound comes in a 50 g container with a rated conductivity of 10.5 W/mK. It is formulated as a non‑conductive gel that sits between a processor or graphics chip and its cooler. The paste suits desktop PCs, PlayStation 4 units and other devices that need reliable heat transfer.

10.5 W/mK conductivity rating

The single figure that decides fit is the 10.5 W/mK thermal conductivity. That value determines how quickly heat moves from the die to the heatsink. Buyers who need a higher conductivity rating for extreme overclocking or dense server racks should look elsewhere.

Stable from –50 °C to 250 °C

The compound remains stable across a long‑term operating range of –50 °C to 250 °C. It does not dry out or become volatile under normal loads, so thermal resistance stays consistent. The gel texture spreads thinly with a scraper or fingertip, minimising air gaps without mess.

特長

  • 5 W/mK conductivity moves heat fast from CPU and GPU cores
  • 50 g syringe supplies enough paste for several builds or re-applications
  • Non-conductive formula removes short-circuit risk around sensitive components
  • Stable from -50 °C to 250 °C for reliable long-term operation
  • Smooth gel texture spreads easily by finger or scraper

仕様

BrandMaxtor
SeriesGL
ModelL
Volume / Net Weight50g
Thermal Conductivity10.5W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsGEL canned thermal paste can be purchased at an extremely low price with a net content of 50g and a thermal conductivity coefficient of 10.5W/mK, which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from

この商品に関する質問

How much will the 10.5 W/mK conductivity actually lower my CPU temperature once applied?

The 10.5 W/mK rating means heat moves efficiently from the die to the cooler, typically dropping core temperatures by several degrees compared with standard pastes, though exact results depend on your cooler and workload.

Is the paste electrically conductive or safe if it spreads onto the motherboard?

It is non-conductive, so accidental contact with PCB traces or pins will not cause a short circuit.

What is the largest CPU heat-spreader the 50 g tub can cover?

At the recommended A4-paper thickness, 50 g is enough for dozens of mainstream desktop CPUs and multiple GPU or console reapplications.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。