暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with 1.14 inch IPS screen and USB-C port

MCDODO

MCDODO ESP32 T-Display 1.14" IPS 16MB CH9102F Development Board

SKU CH-JY38-ZWVRM

ESP32 development board with 1.14-inch IPS display and 16MB flash memory

  • TypeSingle Board Computers
  • 16 MB flash stores large firmware and graphics
  • 14 inch IPS display shows colour data clearly
  • CH9102F USB-C gives reliable serial link
  • 67 mA active draw keeps battery projects running
  • 350 µA sleep current extends standby time

ESP32 T-Display Development Board

The MCDODO ESP32 T-Display board integrates a 1.14 inch IPS ST7789V screen with a CH9102F USB interface. It provides 16 MB flash storage and draws roughly 67 mA when active. The compact module targets makers building Wi-Fi and BLE connected projects.

Makers needing an integrated display versus

This board suits developers who want a ready-to-use LCD on the same PCB as the ESP32 wireless chip. Builders who need a larger screen area or a different display technology should look at other modules. Projects requiring extremely low sleep current below the stated 350 µA may need alternative hardware.

1.14 inch IPS ST7789V display with 16 MB flash

The 1.14 inch IPS panel driven by the ST7789V controller is the defining feature that determines fit. Its physical size and 16 MB flash capacity decide whether the board fits the enclosure and stores the required firmware.

特長

  • 16 MB flash stores large firmware and graphics
  • 14 inch IPS display shows colour data clearly
  • CH9102F USB-C gives reliable serial link
  • 67 mA active draw keeps battery projects running
  • 350 µA sleep current extends standby time

仕様

TypeSingle Board Computers

この商品に関する質問

How can I confirm the 1.14 inch IPS display is working correctly after connecting the board via USB-C?

Power the board through the USB-C port and watch for the display to initialise; the ST7789V panel should show graphics or text once the firmware runs, and the working current will settle around 67 mA.

What comes in the box with the ESP32 T-Display board and what must I provide separately?

The board integrates the 1.14 inch IPS display, 16 MB flash, CH9102F USB-C interface and Wi-Fi/BLE radio on a single PCB; you only need to supply a USB-C cable and a power source or host computer.

Which flash capacity should I choose for projects that store larger assets or OTA updates?

The 16 MB flash option provides enough space for bigger firmware images, graphics buffers and over-the-air update partitions without needing external storage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。