暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular development board with a small OLED screen, Type-C port, and integrated battery

MCDODO

MCDODO Heltec V3 ESP32 LoRa Development Board SX1262 800mAh Battery OLED .96in Black

SKU CH-G64P-5V9Y3

ESP32-S3 LoRa board with SX1262 radio, 0.96in OLED and 800mAh battery for Meshtastic and LoRaWAN nodes

  • TypeSingle Board Computers
  • Dual-core 240MHz ESP32-S3 powers complex IoT applications
  • SX1262 LoRa chip delivers 21dBm transmit power and -134dBm sensitivity
  • Integrated .96in OLED shows real-time sensor data instantly
  • 800mAh battery with ultra-low-power design enables extended off-grid operation
  • Bluetooth 5 plus WiFi and LoRa combined in one compact board

Purpose-built IoT node

The Heltec V3 ESP32 LoRa development board combines a dual-core 240MHz ESP32-S3 with an SX1262 LoRa transceiver for long-range wireless projects. It targets makers building Meshtastic networks, LoRaWAN sensors or smart-home and industrial control nodes. A .96in OLED and an 800mAh battery are integrated on the compact PCB.

Verify your toolchain and antenna plan

Confirm that your development environment supports the ESP32-S3 architecture and the CP2102 USB-to-serial interface for flashing. The board exposes an IPEX antenna port, so you must source a compatible antenna for the LoRa radio. Ensure your enclosure design accommodates the pre-soldered GPIO header and the Type-C USB connector.

Ruggedised enclosure with daily-use implications

The supplied N30 black case protects the board while keeping the OLED visible for real-time status. Type-C USB provides both power and serial access without proprietary cables. The 21dBm transmit power and -134dBm sensitivity (SF12) suit remote deployments, while the onboard lithium management circuit handles charging cycles for the 800mAh cell.

特長

  • Dual-core 240MHz ESP32-S3 powers complex IoT applications
  • SX1262 LoRa chip delivers 21dBm transmit power and -134dBm sensitivity
  • Integrated .96in OLED shows real-time sensor data instantly
  • 800mAh battery with ultra-low-power design enables extended off-grid operation
  • Bluetooth 5 plus WiFi and LoRa combined in one compact board

仕様

TypeSingle Board Computers

この商品に関する質問

Does the board ship with the OLED display, battery and case already fitted, or do I need to buy any of them separately?

The Heltec V3 board comes with the 0.96 OLED, an 800mAh battery and the N30 case included, so no extra parts are required to start.

Which LoRa chip version is on this board and what transmit power does it deliver?

It uses the SX1262 LoRa chip providing 21dBm transmit power and -134dBm sensitivity at SF12 for long-range links.

What does the 240MHz dual-core ESP32-S3 mean for real-world firmware like Meshtastic?

The 240MHz dual-core ESP32-S3 runs Meshtastic and LoRaWAN stacks smoothly while driving the OLED and managing Bluetooth 5 and Wi-Fi radios simultaneously.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。