暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with USB-A plug and terminal header

MCDODO

MCDODO USB to CAN FD Adapter Canable 2.0 5 Mbps

SKU CH-J77C-8AVY9

A USB-to-CAN FD adapter based on Canable 2.0 supports 5 Mbps for bus monitoring and debugging

  • TypeSingle Board Computers
  • CAN FD monitoring up to 5 Mbps
  • Based on Canable 2.0 open hardware
  • Pre-flashed Slcan firmware with DFU boot button
  • Works with BusMaster, PCAN, SLCAN software
  • Lifetime technical support from Jhoinrch

USB to CAN FD Adapter for Engineers

This adapter converts USB signals to CAN FD and classic CAN frames at up to 5 Mbps. It targets automotive engineers, industrial robotics developers and hobbyists who need a compact tool for bus monitoring and servo motor debugging. The hardware follows the open Canable 2.0 design published on GitHub.

Check host OS and software compatibility

Verify that your development machine runs an operating system supported by the Slcan firmware or any alternative firmware you plan to flash. Ensure the chosen CAN analysis software such as BusMaster or PCAN can communicate over a virtual serial port created by the adapter.

Sustained high-speed bus capture

The device maintains continuous 5 Mbps CAN FD traffic without relying on short-burst buffers. Firmware updates via the boot button and DfuSeDemo let you optimise buffering for long logging sessions typical in industrial equipment diagnostics.

特長

  • CAN FD monitoring up to 5 Mbps
  • Based on Canable 2.0 open hardware
  • Pre-flashed Slcan firmware with DFU boot button
  • Works with BusMaster, PCAN, SLCAN software
  • Lifetime technical support from Jhoinrch

仕様

TypeSingle Board Computers

この商品に関する質問

Does the MCDODO USB to CAN FD adapter ship with any cables or connectors, or must I source them separately?

The listing describes the adapter itself; no cables or connectors are mentioned as included, so plan to supply your own USB cable and CAN bus wiring.

How does the Canable 2.0 hardware differ from earlier versions, and which one should I pick?

This unit is built on the Canable 2.0 design and supports CAN FD at up to 5 Mbps; earlier versions do not offer that speed or protocol support.

What does the 5 Mbps CAN FD rate mean when I connect the adapter to a vehicle or robot bus?

It sets the maximum bit-rate the adapter can handle on a CAN FD network; actual throughput will depend on bus load, cable quality and the firmware you flash.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。