暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Mean Well

Mean Well RS-150-24 156W 24V 6.5A Power Supply

SKU CH-QZP5-HF622

Enclosed AC-DC unit delivers 156 W at 24 V and 6.5 A, withstands 300 VAC surge for 5 seconds and 70 °C ambient with 105 °C capacitors

  • TypeAT
  • 156 W output powers demanding 24 V equipment
  • 5 A continuous current delivers stable single-rail performance
  • 70 °C operating limit handles harsh environments
  • 300 VAC surge tolerance protects against input spikes
  • 105 °C rated capacitors extend service life

Enclosed 156W 24V AT power supply

This Mean Well RS-150-24 unit delivers 156 watts at 24 volts and 6.5 amps from an AC input. The enclosed switching design uses 105 degree C rated electrolytic capacitors for extended service life in industrial and automation equipment.

Suits fixed 24V loads in harsh environments

Builders needing adjustable voltage, multiple output rails or a different form factor should consider other models. The single-output AT layout does not support modular cabling or redundant configurations.

Sustained operation at 70 degree C ambient

The supply withstands 5G vibration and survives a 300VAC surge for five seconds. Components rated to 105 degree C maintain stable output during continuous duty rather than only short peaks.

特長

  • 156 W output powers demanding 24 V equipment
  • 5 A continuous current delivers stable single-rail performance
  • 70 °C operating limit handles harsh environments
  • 300 VAC surge tolerance protects against input spikes
  • 105 °C rated capacitors extend service life

仕様

TypeAT

この商品に関する質問

What AC input voltage range does the RS-150-24 require to operate?

The unit accepts a wide AC input and can withstand a 300 VAC surge for 5 seconds, so standard mains voltages are supported.

Will the 24 V, 6.5 A output work with equipment designed for a 12 V supply?

No, this model delivers 24 V at up to 6.5 A; connecting it to 12 V gear would damage that equipment.

How can I confirm the supply is running correctly after installation?

Measure the output with a multimeter — you should read approximately 24 V DC under load, and the unit should remain within its 70 °C operating temperature limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。