EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
MSI
Refurbished RTX 2080 SUPER GPU with 3072 CUDA cores, 8GB 256-bit GDDR6 at 15.5 Gbps, boost clock 1830 MHz, PCI Express 3.0 x16, 1 x HDMI 2.0b, 3 x DisplayPort 1.4, VR ready, 250W TDP
This refurbished graphics card uses the NVIDIA GeForce RTX 2080 SUPER GPU with 3072 CUDA cores and 8GB of GDDR6 memory on a 256-bit interface. The factory boost clock reaches 1830 MHz while the effective memory clock runs at 15.5 Gbps. It connects through a PCI Express 3.0 x16 slot and supports a maximum resolution of 7680 x 4320 across four displays. The card is designed for gaming and VR workloads at high settings.
Verify that your motherboard provides a free PCI Express 3.0 x16 slot and that your case has enough length for a dual-fan card. The board draws up to 250 W and requires both an 8-pin and a 6-pin PCIe power connector from the supply. MSI recommends a power supply unit rated at 650 W or higher to ensure stable operation. HDCP 2.2 support is included for protected content playback.
The TORX Fan 2.0 cooler combines steep curved blades for accelerated airflow with traditional blades for steady flow across the heatsink. At the 250 W thermal design power the fans ramp up under load but remain moderate during lighter tasks. Power draw scales with GPU utilisation, so idle consumption is low while sustained gaming hits the rated limit. The dual-fan layout exhausts heat into the case, so adequate chassis ventilation is important.
| Brand | MSI |
|---|---|
| Model | RTX 2080 Super Ventus XS OC |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU | GeForce RTX 2080 SUPER |
| Boost Clock | 1830 MHz |
| CUDA Cores | 3072 |
| Effective Memory Clock | 15.5 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Color | Silver |
| Max Resolution | 7680 x 4320 |
| SLI Support | NVIDIA NVLink (SLI-Ready), 2-way |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 250W |
| System Requirements | Recommended PSU: 650W |
| Recommended PSU Wattage | 650W |
| Power Connector | 1 x 8-Pin, 1 x 6-pin |
| HDCP Ready | 2.2 |
| Features | TORX Fan 2.0 Dispersion fan blade: Steep curved blade accelerating the airflow. Traditional fan blade: Provides steady airflow to massive heat sink below. Afterburner Overclocking Utility OC Scanner: An automated function finds the highest stable overclock settings. Kombustor: The latest DirectX versions benchmark supporting. Predator: In-game video recording. NVIDIA G-SYNC and HDR Get smooth, tear-free gameplay at refresh rates up to 240 Hz, plus HDR, and more. This is the ultimate gaming display and the go-to equipment for enthusiast gamers. GeForce RTX VR By combining advanced VR |
| Max GPU Length | 257 mm |
| Card Dimensions (L x H) | 10.12" x 5.00" |
| 配送重量 | 1.45 kg |
| 梱包サイズ | 356 × 269 × 79 mm |
The refurbished card ships with the GPU itself, dual TORX Fan 2.0 coolers, and a metal backplate. You must supply a 650 W PSU with one 8-pin and one 6-pin PCIe power cable, plus a PCIe 3.0 x16 slot on the motherboard.
This is the single Ventus XS OC variant with 8 GB GDDR6 on a 256-bit bus, 3072 CUDA cores, and a 1830 MHz boost clock. No other memory capacities or cooler designs exist for this model.
The 1830 MHz boost clock is the maximum GPU frequency under load when power and thermal limits allow. Actual sustained clocks depend on case airflow, PSU quality, and the 250 W TDP ceiling enforced by the 8-pin plus 6-pin power connectors.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?