EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
MSI
Compact single-fan graphics card with 12 GB GDDR6 memory and 3584 CUDA cores for small-form-factor builds
The MSI RTX 3060 AERO ITX 12G OC fits a full GeForce RTX 3060 GPU into a 172 mm single-fan board. It targets builders working in small-form-factor cases who still want 12 GB of GDDR6 memory and a 192-bit bus for modern texture workloads. The card draws up to 170 W through one 8-pin connector and runs on a 550 W supply.
Under continuous load the single fan must move enough air to keep the 170 W TDP in check, so case airflow becomes the limiting factor. The boost clock of 1792 MHz will hold only while temperatures stay within the thermal envelope; restricted ventilation will cause earlier throttling. PCI Express 4.0 keeps data flowing to the 3584 CUDA cores without bus saturation.
Moving from a 6 GB card to this 12 GB model removes the memory ceiling that forces texture streaming compromises at 1440p. The extra capacity also benefits creative applications that address large frame buffers directly. If your current board already delivers 12 GB on a 192-bit interface the jump is marginal; the gain appears when VRAM was the bottleneck.
| Brand | MSI |
|---|---|
| Model | RTX 3060 AERO ITX 12G OC |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 |
| Boost Clock | 1792 MHz |
| CUDA Cores | 3584 |
| Memory Size | 12GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Single Fan |
| Thermal Design Power | 170W |
| Recommended PSU Wattage | 550W |
| Power Connector | 8-Pin |
| Max GPU Length | 172 mm |
| 配送重量 | 0.83 kg |
| 梱包サイズ | 307 × 224 × 70 mm |
The 170 W thermal design power is handled by a single-fan cooler in a 172 mm long card; expect higher fan speeds and warmer exhaust than dual- or triple-fan models under sustained load.
An 8-pin PCIe power connector and a PSU rated for at least 550 W are required to run the RTX 3060 AERO ITX 12G OC.
Yes, the card is backward compatible with PCIe 3.0 slots; it will operate at PCIe 3.0 speeds without any configuration needed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?