MSI
MSI SPATIUM M570 PRO PCIe 5.0 NVMe M.2 2TB FROZR internal SSD
PCIe 5.0 NVMe drive with FROZR heatsink delivering 12400 MB/s reads, 11800 MB/s writes and 3000 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory ComponentsNVMe
- InterfacePCI-Express 5.0 x4
- PCIe 5.0 x4 interface delivers up to 12400 MBps read speeds
- Passive FROZR heatsink lowers drive temperature by up to 20°C silently
- 3000 TBW endurance rating supports heavy write workloads
- NVMe 2.0 protocol enables low-latency data access
- M.2 2280 form factor fits standard motherboard slots
High-speed PCIe 5.0 NVMe storage
The MSI SPATIUM M570 PRO is a 2TB internal SSD built on the PCIe 5.0 x4 interface and the NVMe 2.0 protocol. It targets enthusiasts who need maximum throughput for gaming, content creation or heavy workloads. The drive uses an MSI controller and 3D NAND flash to deliver sequential reads up to 12400 MBps and writes up to 11800 MBps.
Passive FROZR thermal design
An enthusiast-grade passive heatsink uses integrated Core Pipes to lower operating temperatures by up to 20°C without adding any fan noise. The slim 3.00mm profile fits standard M.2 2280 slots while keeping the controller and flash cool under sustained loads. No active cooling or extra power draw is required for the thermal solution.
Endurance and data protection
The drive is rated for 3000 TBW, providing a high write endurance ceiling for intensive use. Built-in error-correction and data-security features protect integrity during unexpected power loss or heavy I/O. The package includes the SSD with the pre-attached FROZR heatsink; no separate software suite or mounting hardware is mentioned in the specifications.
特長
- PCIe 5.0 x4 interface delivers up to 12400 MBps read speeds
- Passive FROZR heatsink lowers drive temperature by up to 20°C silently
- 3000 TBW endurance rating supports heavy write workloads
- NVMe 2.0 protocol enables low-latency data access
- M.2 2280 form factor fits standard motherboard slots
仕様
| Brand | MSI |
|---|---|
| Series | SPATIUM Series |
| Model | M570 PRO |
| Part Number | SM570PN2TBF |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | NVMe |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Controller | MSI |
| Max Sequential Read | Up to 12400 MBps |
| Max Sequential Write | Up to 11800 MBps |
| Terabytes Written (TBW) | 3000TB |
| Height | 3.00mm |
| Width | 94.80mm |
| Depth | 71.65mm |
| 配送重量 | 0.05 kg |
| 梱包サイズ | 165 × 105 × 25 mm |
この商品に関する質問
How do I install the M.2 2280 drive and what step is often missed?
Insert the drive at an angle into the motherboard M.2 slot, press it flat and secure it with the single retention screw; the step often missed is removing the protective film from the FROZR heatsink thermal pads before fastening the drive.
What maintenance or replacement will the 2TB drive need later?
No routine maintenance is required; the drive is rated for 3000 TBW, so replacement is only needed once that write endurance is reached or if the controller fails.
What limit appears first during sustained heavy writes?
The FROZR passive heatsink is designed to lower temperatures by up to 20 °C; if thermal throttling activates, sequential write speed will drop below the 11800 MB/s peak until the drive cools.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
