OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
MSI
Delivers 14 Gbps GDDR6 memory and 1695 MHz boost clock over a 256-bit bus with 4864 CUDA cores for 4K gaming and creative workloads
The MSI Ventus GeForce RTX 3060 Ti 8GB is a PCI Express 4.0 x16 video card built around the NVIDIA GeForce RTX 30 Series GPU with 4864 CUDA Cores and a 1695 MHz boost clock. It targets 1440p gaming and content creation workloads that benefit from 8GB of GDDR6 memory running at 14 Gbps across a 256-bit interface.
The dual-fan thermal design uses TORX Fan 3.0 to generate high static pressure, moving air through the heatsink continuously during extended gaming or render sessions. This steady airflow keeps the GPU at stable clocks without the throttling that can appear in short-burst tests, while the LHR variant caps Ethereum hash rate at an estimated 25 MH/s.
Verify that your motherboard provides a PCI Express 4.0 x16 slot and that your power supply delivers sufficient wattage and connectors for the card. The rear bracket offers one HDMI 2.1 and three DisplayPort 1.4a outputs supporting up to 7680 x 4320 resolution across four monitors, with DirectX 12 Ultimate and OpenGL 4.6 compatibility.
| Brand | MSI |
|---|---|
| Series | Ventus |
| Model | RTX 3060 Ti VENTUS 2X 8G OCV1 LHR |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 Ti |
| Boost Clock | 1695 MHz |
| CUDA Cores | 4864 Cores |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 200W |
| Recommended PSU Wattage | 650W |
| Power Connector | 8-Pin |
| HDCP Ready | Yes |
| Max GPU Length | 235 mm |
| Card Dimensions (L x H) | 9.25" x 4.88" |
| Slot Width | 2 Slots |
The TORX Fan 3.0 design creates high static pressure to push thermal performance limits under sustained workloads.
The card draws power through the PCI Express 4.0 x16 slot and onboard connectors; ensure your supply has the required cables for this model.
Yes, the four outputs support up to 7680 x 4320 resolution and multi-monitor setups across older and current displays.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?