Mushkin Enhanced
Mushkin Enhanced MKNSSDHL256GB-D8 256GB internal SSD
M.2 2280 NVMe 1.3 internal SSD with 256GB capacity delivering up to 2010MB/s sequential read and 1250MB/s sequential write speeds
- Device TypeInternal Solid State Drive (SSD)
- Up to 2010 MB/s sequential read for fast boot and load times
- Up to 1250 MB/s sequential write to move large files quickly
- 200,000 random read IOPS for snappy multitasking
- 260,000 random write IOPS for responsive application performance
- 256 GB capacity in M.2 2280 form factor fits compact builds
Capacity and interface
The Mushkin Enhanced Helix-L MKNSSDHL256GB-D8 is a 256GB internal solid-state drive built in the M.2 2280 form factor. It connects through a PCIe Gen3 x4 link using the NVMe 1.3 protocol and suits desktops or laptops with a compatible M-key slot.
Sequential throughput
Rated sequential speeds reach 2010MB/s for reads and 1250MB/s for writes. These figures are the primary indicator of whether the drive matches the throughput needs of a given workload or platform.
Sustained behaviour
Random performance is specified at 200000 IOPS read and 260000 IOPS write at 4KB. Under continuous operation the controller manages thermal output to maintain consistent latency rather than allowing performance to drop after a short burst.
特長
- Up to 2010 MB/s sequential read for fast boot and load times
- Up to 1250 MB/s sequential write to move large files quickly
- 200,000 random read IOPS for snappy multitasking
- 260,000 random write IOPS for responsive application performance
- 256 GB capacity in M.2 2280 form factor fits compact builds
仕様
| Device Type | Internal Solid State Drive (SSD) |
|---|
この商品に関する質問
What does the 2010MB/s sequential read figure mean once the drive is installed in a real machine?
It represents the peak throughput for large, contiguous files under ideal conditions; everyday mixed workloads will typically run below that number.
What does the PCIe Gen3 x4 NVMe 1.3 interface cap in practice?
The four-lane Gen3 link limits maximum bandwidth to the drive's rated 2010MB/s read and 1250MB/s write, so the interface does not restrict those speeds.
What physical slot and mounting does the M.2 2280 form factor need?
It requires an M.2 key-M slot that accepts 2280-length cards and a motherboard standoff at 80mm for the retaining screw.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



