EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
Converts AC mains to 12 V DC at 15 A with built-in over-voltage, over-current and short-circuit protection
This myVolts unit converts AC mains input to a regulated 12 V DC output rated at 15 A and 180 W. It is built for indoor use with LED strips, CCTV systems, industrial automation or similar low-voltage DC loads that require a steady 12 V rail.
The supply accepts AC 110 V to 240 V, so verify your local mains voltage falls within that range. Ensure the total connected load does not exceed 15 A at 12 V, and confirm the metal case can be mounted securely in a ventilated indoor location.
The aluminium enclosure acts as a heatsink and relies on natural convection; no fan is fitted, so operation is silent. Continuous full-load use will warm the case noticeably, so allow free airflow around the unit. Efficiency meets standard switching-supply levels, drawing roughly 180 W from the mains at maximum output.
| Type | AT |
|---|
The package includes one power supply unit only; no power cord or mounting brackets are supplied.
The 15A model delivers 180W, measures 198x98x43mm, and accepts 85-265V AC input, while the 12.5A model provides 150W in the same case size and the 20A model provides 240W in a larger 200x100x44mm case with 110V/220V ±15% input.
The supply is rated for 15A continuous output at 12V up to 40°C ambient with built-in over-voltage, over-current and short-circuit protection.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?