暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts 30cm PSU Cable Extension Kit Green 1 x 24-P 2 x 8-P CPU 3 x 8-P GPU

SKU CH-JEQX-M5W04

Sleeved 18AWG extension kit adds 30cm to ATX, dual CPU and triple GPU cables with combs for tidy routing

  • TypeAT
  • 18AWG tinned copper wires resist heat and humidity for lasting performance
  • 30cm extensions with included combs enable clean, professional cable routing
  • Green braided sleeving adds vivid colour to match custom build themes
  • Kit covers motherboard 24-pin, two CPU 4+4-pin and three GPU 6+2-pin connectors
  • UL 1015 rated wiring meets safety standards for reliable power delivery

Cable Kit Contents

This myVolts kit supplies one 24-pin ATX motherboard extension, two 4+4-pin EPS CPU extensions and three 6+2-pin PCIe GPU extensions, each 30 cm long. Green braided sleeving and included combs let builders route cables cleanly for a professional look. The package also contains three 24-pin combs and fifteen 8-pin combs for precise alignment. It suits anyone upgrading cable aesthetics on a standard ATX power supply.

Extension Limits

These cables extend existing PSU leads; they do not replace the power supply or add new connectors. Length is fixed at 30 cm, so reach is limited to nearby routing paths. The 18AWG UL 1015 tinned copper conductors handle typical ATX loads but the kit cannot increase the power supply’s rated output. Builders needing longer runs or different connector counts must look elsewhere.

Wire Gauge Decides Fit

The single specification that determines compatibility is the 18AWG UL 1015 tinned copper wire used throughout. It provides the stiffness and current capacity needed for modern CPU and GPU power delivery while remaining routable. If a build requires a different gauge or insulation rating, this kit will not match that requirement.

特長

  • 18AWG tinned copper wires resist heat and humidity for lasting performance
  • 30cm extensions with included combs enable clean, professional cable routing
  • Green braided sleeving adds vivid colour to match custom build themes
  • Kit covers motherboard 24-pin, two CPU 4+4-pin and three GPU 6+2-pin connectors
  • UL 1015 rated wiring meets safety standards for reliable power delivery

仕様

TypeAT

この商品に関する質問

Should I pick the 30cm or 50cm length for my build?

Choose 30cm for compact cases or tight routing near the power supply; choose 50cm if you need extra reach across a larger chassis or behind a motherboard tray.

What does the 18AWG wire gauge mean for my power delivery?

18AWG tinned copper conductors handle typical CPU and GPU currents with low resistance, and the UL 1015 rating confirms heat and humidity resistance for reliable long-term operation.

Are these extensions compatible with standard ATX 24-pin and EPS 8-pin headers?

Yes — the kit includes one 24-pin ATX motherboard extension, two 4+4-pin EPS CPU extensions, and three 6+2-pin PCIe GPU extensions, all matching standard ATX pinouts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。