暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal PSU unit with rear fan grille and power socket

myVolts

myVolts 400W Power Supply HP Z230 Tower 704427-001 705045-001 860473-001 DPS-400AB-19 A

SKU CH-CEDN-KK60C

400 W AT replacement power supply for HP Z230 Tower workstations

  • TypeAT
  • Delivers 400 W for demanding workstation tasks
  • Brand-new unit ensures full rated performance
  • Direct fit for HP Z230 Tower using part 704427-001
  • Also matches part numbers 705045-001 and 860473-001

400W AT Power Supply for HP Z230 Tower

This 400W AT-type power supply is built as a direct replacement for the HP Z230 Tower workstation series. It matches part numbers 704427-001, 705045-001 and 860473-001 for a precise fit. The unit suits IT professionals and repair technicians restoring or maintaining these specific workstations. New condition ensures reliable operation from first install.

Sustained-load behaviour on the HP Z230 platform

Under continuous demand the supply delivers its rated 400W to the workstation's original components without exceeding design limits. The AT form factor aligns with the Z230 chassis airflow path so heat is exhausted normally during long rendering or compute sessions. No extra cooling or wiring changes are required for the supported configuration. Buyers needing higher wattage for upgraded GPUs or additional drives should verify the chassis and motherboard limits first.

特長

  • Delivers 400 W for demanding workstation tasks
  • Brand-new unit ensures full rated performance
  • Direct fit for HP Z230 Tower using part 704427-001
  • Also matches part numbers 705045-001 and 860473-001

仕様

TypeAT

この商品に関する質問

How much heat and fan noise does the 400W unit produce when the HP Z230 Tower runs continuously?

The 400W supply uses a standard AT design with an internal fan; under full load it will exhaust warm air from the rear of the Z230 chassis, and fan speed rises with temperature to keep components within safe limits.

Which power cables must already be present in my HP Z230 Tower for the DPS-400AB-19 A to connect?

The replacement unit plugs into the existing motherboard ATX connector, CPU power header and peripheral leads already routed inside the HP Z230 Tower; no additional cables are required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。