暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sealed black ABS internal PSU for PS4 PRO 7000 with screwdriver

myVolts

myVolts ADP-300CR Power Supply for PS4 PRO 7000

SKU CH-5HTJ-FZZTR

Replacement AT power supply for PS4 PRO-7000 with 100-240V input, 12V/23.5A and 4.8V/1.5A outputs, includes screwdriver

  • TypeAT
  • Replaces a failed PS4 PRO 7000 power supply with ADP-300CR model
  • Fully sealed ABS housing resists wear and corrosion for lasting durability
  • Compact streamlined design includes screwdriver for straightforward self-installation
  • Wide 100-240V 50/60Hz input works across global mains voltages
  • Delivers 12V 23.5A and 4.8V 1.5A outputs matching original specs

Direct PS4 PRO 7000 replacement

This internal AT power supply is built specifically for the PS4 PRO 7000 console using the ADP-300CR form factor. It accepts a universal 100-240V input at 50/60Hz and delivers 12V at 23.5A plus 4.8V at 1.5A. The unit is intended for owners whose original supply has failed and who need an exact electrical match.

Included screwdriver enables self-install

The package supplies the replacement power supply and a single screwdriver so the swap can be completed without sourcing extra tools. The fully sealed ABS housing is described as wear-resistant and corrosion-resistant, which helps the unit withstand repeated handling during the repair. No additional cables, adapters or software are bundled.

Simple screw-out swap with sealed housing

Installation consists of removing the old module and fastening the new one in its place using the provided screwdriver. The compact, streamlined design fits the existing chassis cut-out without modification. The fully sealed construction means no internal dust cleaning is possible, so the unit must be kept free of debris from the start. Builders needing a different wattage or pin layout cannot use this model.

特長

  • Replaces a failed PS4 PRO 7000 power supply with ADP-300CR model
  • Fully sealed ABS housing resists wear and corrosion for lasting durability
  • Compact streamlined design includes screwdriver for straightforward self-installation
  • Wide 100-240V 50/60Hz input works across global mains voltages
  • Delivers 12V 23.5A and 4.8V 1.5A outputs matching original specs

仕様

TypeAT

この商品に関する質問

Will the internal fan on the ADP-300CR need cleaning or replacement after long use?

The unit is fully sealed, so the fan is not user-serviceable; if it fails the whole power supply must be swapped.

Which rail hits its limit first when the console runs at full load for hours?

The 12 V rail rated at 23.5 A will reach its ceiling before the 4.8 V rail at 1.5 A.

How much heat and noise should I expect once the PS4 Pro 7000 runs all day on this supply?

The sealed metal shell dissipates heat passively; fan noise stays low unless the 12 V load nears 23.5 A continuously.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。