暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular power supply unit with ABS plastic casing, compact sealed design, labelled ADP-300FR 12V 23.5A

myVolts

myVolts ADP-300FR power supply 12V 23.5A 100-240V 50/60Hz for PRO-7200

SKU CH-C4R3-ZKN84 MPN ADP-300FR

Replacement 12V 23.5A AT power supply for PRO-7200, 100-240V input, sealed ABS housing, 483g

  • TypeAT
  • Delivers stable 12 V 23.5 A output for PRO-7200 systems
  • Wide 100-240 V 50/60 Hz input works worldwide
  • Corrosion-resistant ABS housing extends service life
  • Precise cuts and interfaces enable quick installation
  • Compact 483 g sealed design simplifies transport

Purpose-built replacement for PRO-7200

This power supply is designed as a direct replacement for the PRO-7200 system. It delivers a fixed 12V output at 23.5A from a 100-240V 50/60Hz input. The unit suits technicians or owners restoring a PRO-7200 to working order.

Thermals, noise and power draw

The completely sealed enclosure has no internal fan, so operation is silent. Heat dissipates passively through the ABS housing during normal use. The supply draws up to 300W from the mains to provide the rated 12V 23.5A output.

Build quality and daily handling

The casing uses ABS plastic rated for anti-wear and corrosion resistance. At approximately 483g it is light enough to carry between service calls. Precise cuts and interfaces align with the PRO-7200 mounting points for a secure, tool-free fit.

特長

  • Delivers stable 12 V 23.5 A output for PRO-7200 systems
  • Wide 100-240 V 50/60 Hz input works worldwide
  • Corrosion-resistant ABS housing extends service life
  • Precise cuts and interfaces enable quick installation
  • Compact 483 g sealed design simplifies transport

仕様

TypeAT

この商品に関する質問

How do I install the ADP-300FR in a PRO-7200 and what step is often missed?

Align the unit with the chassis guides, connect the 12V 23.5A output cable firmly, then secure the mounting screws; the step often missed is fully seating the connector until it clicks.

What maintenance or replacement will the ADP-300FR need over time?

The sealed ABS enclosure has no user-serviceable parts; if output drops below 12V 23.5A or the unit becomes noisy, replace the entire power supply.

What limit appears first when the ADP-300FR runs continuously at full load?

The 12V 23.5A current ceiling is reached before thermal protection activates, so sustained loads above 23.5A will trigger shutdown.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。