EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
A 600 W ATX unit with a 14 cm thermally controlled fan, 20+4 pin motherboard and 4+4 pin CPU connectors, six SATA ports and dual 6+2 pin graphics leads for basic desktop builds
This myVolts unit delivers 600 watts of continuous power from a standard ATX form factor. It targets office and home PCs that run modest components and value quiet operation. The active PFC circuit accepts 110 to 230 volts input without a switch. Efficiency exceeds 80 percent under typical loads.
The single specification that decides compatibility is the 6+2-pin to 6+2-pin PCIe cable. It feeds graphics boards that require one six-pin or eight-pin auxiliary power connection. Builds needing two separate PCIe cables or higher wattage will not be supported by this unit.
Clearly labelled connectors reduce wiring errors during installation. A 14 cm fan adjusts speed automatically via an internal thermal sensor, keeping acoustic output low at idle. The package includes the power supply and a mains cord; no modular cables or software utilities are bundled.
| Type | AT |
|---|
The unit can deliver up to 600W of combined output to the motherboard, CPU and graphics connectors while maintaining over 80% efficiency at typical loads.
The PSU uses an AT form factor with a 20+4 pin motherboard connector, 4+4 pin CPU power, six SATA ports and a 6+2 pin graphics lead, limiting builds to components that accept those connectors.
It measures 150 by 160 by 86 millimetres, includes a 14 centimetre fan, and mounts in a standard ATX bay with four rear screws.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?