暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal rectangular power supply unit with DC input and output terminals

myVolts

myVolts DC18V-36V to DC13.8V Power Supply 45A

SKU CH-X2CM-SJQE3

Converts 18–36 V DC vehicle power to a regulated 13.8 V ±0.2 V at up to 45 A with over-voltage and over-current protection for mobile two-way radios

  • TypeAT
  • Converts 18 V to 36 V input to stable 13.8 V output for vehicle radios
  • Delivers up to 45 A continuous current for high-power transmitters
  • Over-voltage protection triggers at 16 V ±1.5 V to shield connected gear
  • Over-current protection activates at 11 A ±1 A preventing overload damage
  • 80 % conversion efficiency reduces heat and extends service life

DC18V-36V to DC13.8V Power Supply

The myVolts DC18V-36V to DC13.8V Power Supply converts a wide DC input range into a stable 13.8V output rated at 45A. It is built as a high-efficiency, high-precision DC conversion regulated supply for vehicle-mounted wireless transmitters such as two-way radios. Over-voltage protection triggers at 16V±1.5V and over-current protection at 11A±1A to protect connected equipment.

Installers running two-way radios from 18V-36V

This unit suits installers who need a regulated 13.8V rail for a walkie-talkie or similar transmitter in a car or truck. The 80% effective rate and 150mVP-P ripple spec support clean operation for sensitive RF gear. Buyers needing an AC-input supply, a different output voltage, or a lower current rating should look at other products.

45A continuous output current

The single specification that decides fit is the 45A output current rating combined with the 13.8V±0.2V output voltage. Verify that your transmitter’s maximum draw stays within this limit and that the 18V-36V input matches your vehicle’s electrical system before purchase.

特長

  • Converts 18 V to 36 V input to stable 13.8 V output for vehicle radios
  • Delivers up to 45 A continuous current for high-power transmitters
  • Over-voltage protection triggers at 16 V ±1.5 V to shield connected gear
  • Over-current protection activates at 11 A ±1 A preventing overload damage
  • 80 % conversion efficiency reduces heat and extends service life

仕様

TypeAT

この商品に関する質問

How do I install the DC18V-36V input unit in a vehicle and which step is often missed?

Connect the supply between the vehicle DC18V-36V source and the walkie-talkie; the step often missed is confirming the source stays within the 18V to 36V window before powering on.

What maintenance or replacement will the supply need later?

No user-serviceable parts are listed; the metal case and 80% effective rate imply heat is managed passively, so only periodic dust removal from the 13 x 8.5 x 5 cm enclosure is practical.

What limit appears first during sustained transmit use?

The output over-current protection triggers at 11A±1A, well below the 45A rating, so that protection circuit will trip before thermal limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。