暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts Dual PSU Adapter ADD3PSU Starter 24Pin 85cm 2000W

SKU CH-FPHJ-1AYMB

Dual PSU adapter links two power supplies to one motherboard with 24-pin and 20+4-pin connectors, supporting up to 2000 W over 85 cm cables

  • TypeAT
  • Connect two PSUs for extra power without upgrading
  • Support three PSUs on one motherboard for high loads
  • 24-pin 20+4 connector works as 24P or 20P
  • 85 cm thin cable keeps routing tidy and stable
  • Rated for systems up to 2000 W total output

Dual PSU Adapter 24Pin 85cm

The myVolts Dual PSU Adapter ADD3PSU Starter connects two power supply units to a single motherboard 24Pin connector. It features one main 20+4Pin female interface and two secondary 24Pin female interfaces. The cable length is approximately 85cm or 33.5in. It is designed for systems requiring up to 2000W combined power.

For multi-GPU builds and workstations

This adapter suits builders who need to combine two existing PSUs to meet high GPU power demands without buying a single higher-wattage unit. It supports 24Pin and 20Pin motherboard headers. It is not for users who only have one PSU or who need to power more than two additional units from one motherboard connection.

2000W maximum combined capacity

The adapter is rated for a total power range within 2000W across the connected power supplies. Exceeding this limit risks instability or damage. Verify that the sum of your PSU ratings stays within this figure before installation.

特長

  • Connect two PSUs for extra power without upgrading
  • Support three PSUs on one motherboard for high loads
  • 24-pin 20+4 connector works as 24P or 20P
  • 85 cm thin cable keeps routing tidy and stable
  • Rated for systems up to 2000 W total output

仕様

TypeAT

この商品に関する質問

Will the 20+4 pin main connector fit my older 20-pin ATX motherboard?

Yes, the main 24-pin female connector is designed as 20+4 so it works with both 24-pin and 20-pin motherboard sockets.

How can I verify the adapter is distributing power correctly once installed?

The system should boot stably and the graphics card should maintain its normal clock speeds without throttling under load.

Does the package include the two secondary PSU cables or only the main 85 cm adapter?

Only one power cable is listed in the box; the two secondary 24-pin cables for the extra PSUs must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。