EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
Converts AC 110V/220V to DC 12V 30A 360W with short-circuit, overload and over-voltage protection for 3D printers, CCTV and LED strips
This 360W regulated unit converts AC 110V or 220V to a steady DC 12V 30A output. It suits WS2812B and WS2801 LED strips, 3D printers, CCTV systems, radio gear and general computer projects. An external trim-pot lets you adjust the output between 0.98V and 14.5V from the 12.2V factory setting.
A selector switch chooses between AC 110V and 220V before powering on. The built-in fan starts automatically for cooling while the supply delivers up to 360W. Protections include short-circuit, overload and over-voltage at 115%–135% with auto-reset or fuse action. An LED shows power-on status and the unit operates from -10°C to 60°C.
Builders who need adjustable voltage, dual AC input or enclosed cooling will gain flexibility over sealed adapters. It is not for loads above 360W or continuous 24/7 duty above 40% of rated power. Devices requiring 24V or other fixed voltages need a different supply.
| Type | AT |
|---|
The supplier states that if it runs 24 × 7 hours the power consumed should not exceed 40 % of the full load
An auto on/off cooling fan runs only when needed and the unit is rated for a working temperature from -10 to 60 °C
The supply accepts AC 110 V or 220 V; choose the proper voltage with the switch before use
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?