暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts LRS-350-24 350W 24V power supply

SKU CH-RZS9-JGMVE MPN LRS-350-24

A 350 W switching power supply delivering 24 V DC from 100-240 V AC input with short-circuit, overload, over-voltage and over-temperature protection

  • TypeAT
  • Automatic protections guard against short circuit, overload, overvoltage, overtemperature and inrush current
  • Quick wiring via clearly labelled terminals lets anyone connect the project fast
  • Stable 24 V DC output at up to 350 W powers LED strips, modules and light bars reliably
  • Wide 100-120 / 200-240 VAC input suits global mains without extra adapters
  • Silent, fanless metal chassis operates from -25 °C to 70 °C with no noise or hidden safety hazards

Regulated switching supply

The myVolts LRS-350-24 is a regulated switching power supply that delivers 350W of continuous DC power. It accepts a universal AC input range of 100-120/200-240VAC and provides selectable 5V, 12V, or 24V outputs. Built-in protections cover short circuit, overload, overvoltage, over temperature, and inrush current. The metal enclosure operates silently without a fan across a -25°C to 70°C range.

Industrial automation and low-voltage lighting

This unit suits engineers wiring industrial control systems, automation machinery, or electronic instrumentation that require stable 24V DC. It also fits LED signage, light boxes, modules, and light bars needing 5V, 12V, or 24V constant voltage. Builders needing ATX pin-outs for PC motherboards or modular cabling for cable management should look elsewhere. Installers requiring IP-rated enclosures for outdoor exposure will need additional weatherproofing.

350W at 24V constant voltage

The decisive figure is the 350W maximum output power at 24V DC, which sets the total load the supply can sustain continuously. Verify that your connected devices draw less than this limit across the chosen voltage rail. The screw-terminal wiring allows quick connection once the load calculation is confirmed.

特長

  • Automatic protections guard against short circuit, overload, overvoltage, overtemperature and inrush current
  • Quick wiring via clearly labelled terminals lets anyone connect the project fast
  • Stable 24 V DC output at up to 350 W powers LED strips, modules and light bars reliably
  • Wide 100-120 / 200-240 VAC input suits global mains without extra adapters
  • Silent, fanless metal chassis operates from -25 °C to 70 °C with no noise or hidden safety hazards

仕様

TypeAT

この商品に関する質問

What input voltage range must my mains supply provide for this 350 W unit to operate?

The supply accepts 100-120 VAC or 200-240 VAC, selectable via the input voltage switch on the chassis.

Will the 24 V output share a common ground with legacy 12 V equipment powered from the same unit?

All three outputs (5 V, 12 V, 24 V) are derived from the same isolated secondary, so their grounds are common and safe to tie together.

How can I verify the 24 V rail is regulating correctly after wiring the screw terminals?

Measure the output terminals with a multimeter; a steady reading at 24 V under load confirms the internal regulation and protection circuits are functioning.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。