暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts Power Supply Breakout Board for Emerson 7001484 1200W

SKU CH-JZSF-6551D

Breakout board adapts Emerson 7001484 server PSUs up to 1200W with LED voltage display

  • TypeAT
  • Real-time voltage monitoring via built-in LED display
  • Supports Emerson 70001484-J1000 power supply up to 1200W
  • AT-type breakout board for server PSU bare board use
  • Optional 12 output wires expand connectivity for mining rigs
  • Delivers 12V output power for graphics card mining applications

Breakout Board for Emerson 7001484 PSU

This adapter converts an Emerson 7001484 server power supply into a usable source for mining rigs. It supports the unit up to its 1200W rating and provides a real-time LED voltage display. The board is designed specifically for this Emerson model and is sold new.

For Mining Builds Using This Emerson Unit

The board suits builders powering graphics cards for ETH or BTC mining with a compatible Emerson 70001484-J1000 supply. It is not for users with different server PSU models or those requiring a standard ATX form factor. Buyers without this exact Emerson unit cannot use the adapter.

12V Output for Mining Graphics Cards

The adapter delivers a 12V output intended for mining graphics card power. This single voltage rail determines whether the board matches the load requirements of the connected cards. Verify that the target hardware operates solely on 12V before purchasing.

特長

  • Real-time voltage monitoring via built-in LED display
  • Supports Emerson 70001484-J1000 power supply up to 1200W
  • AT-type breakout board for server PSU bare board use
  • Optional 12 output wires expand connectivity for mining rigs
  • Delivers 12V output power for graphics card mining applications

仕様

TypeAT

この商品に関する質問

Will the Emerson 7001484 power supply need any firmware updates or recalibration after installing this breakout board?

No firmware or recalibration is required; the board simply routes the 12 V output and adds a real-time LED voltage display for the Emerson 7001484-J1000 PSU.

What is the maximum continuous power this breakout board can pass from the Emerson 7001484 before hitting its limit?

The board is rated for up to 1200 W continuous throughput from the Emerson 7001484-J1000 power supply.

Does the LED voltage display or the board itself add noticeable heat or fan noise when the PSU runs at full load all day?

The breakout board is passive with no fan; only the LED display draws minimal power, so it adds no audible noise and negligible extra heat.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。