BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
myVolts
A 24 V, 41.6 A switch-mode supply delivering 1000 W with overload, over-voltage and short-circuit protection for industrial, radio and LED use
This pink switch-mode unit delivers a steady 24 V at up to 41.6 A for industrial automation, LED displays, CCTV systems, radio equipment, 3D printers and similar loads. It accepts AC input between 170 V and 250 V and includes short-circuit, overload and overvoltage protection. The aluminium-alloy chassis relies on natural convection cooling and carries CCC, FCC and CE safety marks.
Installers powering LED strips, CCTV cameras or radio gear that require a single 24 V rail will find the 1000 W capacity and low ripple output appropriate. Builders needing multiple voltage rails, ATX-style connectors, modular cabling or active cooling for a desktop PC should look at a different product class. The unit is not designed for battery-charging or redundant-server applications.
Confirm the site mains voltage stays within the 170 V to 250 V window before connecting the L and N terminals. Ensure the enclosure can accommodate the approximate 85 x 58 x 33 mm footprint and allows free airflow for passive cooling. Check that the operating ambient temperature will remain between 0 °C and 40 °C and humidity below 95 % non-condensing.
| Type | AT |
|---|
The unit accepts AC 170-250 V, so your mains must stay within that window.
Yes, both share the same 24 V output; the S-1000-24 simply provides up to 41.6 A while the older unit contributes its 2 A.
Measure between V and GND with a multimeter; it should read 24 V DC under load.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?