暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-120-24 24V 5A 120W power supply

SKU CH-DJ2V-EGJT4

A 24 V 5 A 120 W AT-type supply with overload, over-voltage and short-circuit protection for industrial automation, LED displays, CCTV, radio and 3D printers

  • TypeAT
  • Delivers stable 24 V DC at 5 A for industrial automation
  • 120 W continuous output supports LED displays, CCTV and 3D printers
  • Wide AC 100–240 V input suits global mains supplies
  • Built-in short-circuit, overload and over-voltage protection safeguards connected equipment
  • Operates from 0 to 40 °C with natural convection cooling

Industrial 24 V 120 W power supply

The myVolts S-120-24 delivers 24 V DC at up to 5 A for 120 W continuous output. It accepts 100–240 V AC input and is built for industrial automation, LED displays, CCTV systems, radio equipment, computer engineering projects, LED light bars and 3D printers.

120 W headroom and protection limits

The unit provides stable power for loads drawing up to 5 A at 24 V. Overload, overvoltage and short-circuit protection shut the output down before damage occurs. Operation is rated from 0 to 40 °C with humidity up to 95 % non-condensing; beyond those limits the supply may derate or trip.

Replaces smaller open-frame units

Builders moving up from 48 W or 60 W models gain the extra current needed for larger LED arrays or multi-camera CCTV runs. The step is worthwhile when the load regularly exceeds 2 A and the aluminium chassis can be mounted in a ventilated enclosure.

特長

  • Delivers stable 24 V DC at 5 A for industrial automation
  • 120 W continuous output supports LED displays, CCTV and 3D printers
  • Wide AC 100–240 V input suits global mains supplies
  • Built-in short-circuit, overload and over-voltage protection safeguards connected equipment
  • Operates from 0 to 40 °C with natural convection cooling

仕様

TypeAT

この商品に関する質問

Will the 24 V 5 A output run my existing 12 V LED strips without an extra converter?

The unit delivers 24 V only; 12 V strips need a separate step‑down converter or a 12 V supply.

How can I verify the supply is operating correctly once it’s wired?

Measure the output terminals with a multimeter — you should read about 24 V DC under load.

What comes in the box and what must I source separately?

The power supply itself is included; you must provide AC input wires, DC output cables and any mounting hardware.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。