暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small aluminium power supply with terminal connections and voltage adjuster

myVolts

myVolts S-60-12 12V 5A 60W small power supply

SKU CH-W8NM-HZX77

A compact 12 V 5 A switch-mode unit delivering 60 W with overload, overvoltage and short-circuit protection for industrial automation, LED displays, CCTV and 3D printers

  • TypeAT
  • High efficiency and low DC ripple for stable 12V output
  • Wide AC 100-240V input suits global mains supplies
  • circuit, overload and over-voltage protection safeguards connected equipment
  • 100% full-load burn-in test confirms reliable 60W operation
  • Aluminium alloy chassis operates 0-40°C and stores -20-60°C

Compact 12V 60W supply for industrial

This myVolts S-60-12 unit delivers 12 V at 5 A for a total of 60 W from a 100-240 V AC source. It suits automation panels, CCTV rigs, LED strips and 3D printers that need a steady DC rail without a bulky enclosure.

60 W continuous with overload and overvoltage guards

The supply maintains rated output up to 40 °C ambient and survives storage down to -20 °C. Protection circuits cut power on short circuit, overload or overvoltage, so attached gear is shielded from faults.

Adjustable output and bare-wire terminals

A trim potentiometer lets you fine-tune the DC voltage around 12 V. Screw terminals accept live, neutral, ground and V+ leads, letting integrators wire the unit straight into a machine without extra connectors.

特長

  • High efficiency and low DC ripple for stable 12V output
  • Wide AC 100-240V input suits global mains supplies
  • circuit, overload and over-voltage protection safeguards connected equipment
  • 100% full-load burn-in test confirms reliable 60W operation
  • Aluminium alloy chassis operates 0-40°C and stores -20-60°C

仕様

TypeAT

この商品に関する質問

Will this 12V 5A unit run reliably on the same AC100-240V mains as my older S-36-12 supply?

Yes, both accept AC100-240V input so they share the same mains range.

How can I verify the output is stable after wiring the V+ and GND terminals?

Measure the DC output with a multimeter; it should read close to 12V with low ripple under load.

Does the box include mounting screws or only the aluminium-alloy supply itself?

Only the power supply is included; mounting hardware must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。