暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Open-frame switching power supply module with terminal blocks and component board visible

myVolts

myVolts XK-2412-24 24V 4A-6A 100W power supply

SKU CH-T35T-S6PNC MPN XK-2412-24

AC 85-265 V input delivers 24 V DC at 4-6 A with 100 W output and built-in over-voltage and over-current protection

  • TypeAT
  • Wide input range covers AC 85-265 V for global use
  • 24 V DC output at up to 6 A delivers 100 W
  • Overvoltage and overcurrent protection guard connected equipment
  • Switching topology runs efficiently at 50/60 Hz
  • Compact module integrates directly into DC board designs

Compact 24 V module for industrial and DIY projects

This myVolts XK-2412-24 is a new AT-type switching power supply module that converts AC mains into a regulated DC 24 V output. It is intended for builders who need a 100 W source for control boards, LED strips or small automation equipment.

Over-voltage and over-current protection built in

The module includes both overvoltage protection and over current protection so connected loads are shielded from supply faults. No extra cables or mounting hardware are supplied; the package contains only the bare board.

Verify your mains voltage

The unit accepts AC 85-265 V at 50 Hz or 60 Hz, covering 110 V and 220 V networks worldwide. Ensure your load does not exceed the 4 A to 6 A output range and that you can provide safe enclosure and wiring for the open-frame board.

特長

  • Wide input range covers AC 85-265 V for global use
  • 24 V DC output at up to 6 A delivers 100 W
  • Overvoltage and overcurrent protection guard connected equipment
  • Switching topology runs efficiently at 50/60 Hz
  • Compact module integrates directly into DC board designs

仕様

TypeAT

この商品に関する質問

Does the 100W XK-2412-24 module have a fan that might need cleaning or replacement?

The module is a fanless AC-DC board that relies on passive cooling, so no fan maintenance is required.

At continuous 6A output the 100W rating is reached — does the over-current protection trip or does the voltage sag first?

Built-in over-current protection activates before the rail can sag, latching off the 24V output until the load is reduced.

With the supply mounted in a closed cabinet running 24V at 6A all day, how hot does the aluminium base get?

The aluminium base serves as the heatsink; at full 100W load it runs warm but stays within the component temperature limits for continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。