暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve green DDR5 RDIMM sticks in a row, no heat spreaders, 288 gold pins visible

NEMIX RAM

NEMIX RAM 1.1TB DDR5-6400 ECC RDIMM 12x96GB CL52 1.1V Supermicro H14DST-F memory upgrade

SKU CH-CKGY-TG4FF

A 1.1 TB DDR5-6400 ECC registered RDIMM kit with twelve 96 GB modules at CL52 and 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity from twelve 96GB modules for maximum server memory density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth at 1.10V
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 2Rx4 dual-rank organisation matches the Supermicro H14DST-F population rules
  • 288-pin DDR5 form factor ensures exact mechanical and electrical fit

Capacity and platform fit

This kit delivers 1.1TB of DDR5 memory across twelve 96GB modules, tuned to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects so the full capacity is recognised at its rated speed.

Registered ECC limits

Registered architecture offloads the memory controller, enabling every slot to run fully populated while ECC corrects single-bit errors on the fly, yet the board's own population rules still dictate which slots must be filled first and the maximum capacity per channel.

Installation checklist

Modules are 288-pin RDIMMs that only fit DDR5 RDIMM slots, so verify the motherboard manual for supported capacities, approved DIMM population order and installation steps before purchase to avoid mismatched configurations.

特長

  • 1TB total capacity from twelve 96GB modules for maximum server memory density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth at 1.10V
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 2Rx4 dual-rank organisation matches the Supermicro H14DST-F population rules
  • 288-pin DDR5 form factor ensures exact mechanical and electrical fit

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Should I choose the 12-module 1.1TB kit or buy individual 96GB modules?

The kit delivers 12 matched 96GB modules tested together for the Supermicro H14DST-F, ensuring full 1.1TB capacity and DDR5-6400 operation without mixing ranks or timings.

Will the CL52 latency at DDR5-6400 run at that speed in my H14DST-F?

Yes, the modules are spec-matched to the board's memory controller so the 12 DIMMs populate every slot at the rated 6400 MT/s with CL52 timing.

Does the 288-pin RDIMM form factor and registered ECC design work with the H14DST-F memory population rules?

The kit uses the exact 288-pin registered ECC RDIMM layout the H14DST-F requires, allowing all 12 slots to run fully populated at 1.1V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。