SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00503973BTC
在庫あり
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 2666MHz CL19 UDIMM memory upgrade
A 128GB kit of four 32GB DDR4 UDIMMs running at 2666MHz CL19 for compatible Supermicro workstations
- Capacity128GB (4 x 32GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity for demanding workloads using four 32 GB modules
- DDR4 2666 MT/s speed rated at PC4-21300 for responsive data throughput
- CL19 CAS latency timed at 1.20 V for stable operation
- 288-pin UDIMM form factor fits compatible Supermicro desktop and workstation boards
- 2Rx8 dual-rank organisation with major OEM DRAM chips for reliable density
NEMIX RAM 128GB DDR4 Kit
This NEMIX RAM kit supplies 128GB of DDR4 memory in a matched set of four 32GB UDIMM modules. It operates at 2666MHz with CL19 latency and a standard 1.20V voltage. The unbuffered, non-ECC design targets desktop workstations and compatible Supermicro platforms requiring high-density DDR4 upgrades.
Suits Supermicro DDR4 UDIMM builds
Builders populating four DIMM slots on a supported Supermicro desktop or workstation board will find this kit validated for that environment. It is not for systems requiring registered or ECC memory, nor for platforms limited to lower maximum module densities or different DDR generations. Buyers needing error correction or registered signalling must select a different specification.
Check DDR4 UDIMM slot count and CPU support
Verify the motherboard provides four 288-pin DDR4 UDIMM slots and that the installed processor supports 2666MHz operation at this total capacity. Confirm the board accepts 2Rx8 non-ECC unbuffered modules without requiring registered DIMMs. Consult the system manual for approved population rules and maximum memory per channel before ordering.
特長
- 128 GB total capacity for demanding workloads using four 32 GB modules
- DDR4 2666 MT/s speed rated at PC4-21300 for responsive data throughput
- CL19 CAS latency timed at 1.20 V for stable operation
- 288-pin UDIMM form factor fits compatible Supermicro desktop and workstation boards
- 2Rx8 dual-rank organisation with major OEM DRAM chips for reliable density
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
この商品に関する質問
What motherboard slot does each 32GB DDR4 2666 CL19 module use?
Each module plugs into a standard 288-pin DDR4 UDIMM slot on the motherboard.
Will these 1.2V CL19 sticks run at rated speed if I keep my existing slower DDR4 modules?
The system will clock all installed DDR4 memory down to the speed of the slowest module present.
How can I confirm the kit is running at 2666 MT/s with CL19 timings after installation?
Check the memory frequency and CAS latency reported in BIOS or a system-information tool such as CPU-Z.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
