暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2933 ECC RDIMM CL21 1.2V 288-Pin Dell Precision 5820

SKU CH-AG0Z-F97K1

128 GB DDR4 2933 ECC registered memory kit with four 32 GB modules for Dell Precision 5820 workstations

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB capacity with four 32 GB modules for large workloads
  • DDR4 2933 speed rated at PC4-23400 for fast data transfer
  • ECC registered RDIMM design protects data integrity in critical tasks
  • 2 V operation reduces power draw and heat output
  • Validated compatibility with Dell Precision 5820 tower workstation

Dell Precision 5820 memory kit

This 128GB kit contains four 32GB DDR4 RDIMM modules built for the Dell Precision 5820 tower workstation. Registered ECC operation and a 2933 MT/s data rate deliver the stability required in professional environments. The modules run at 1.2V with CL21 latency and use a 2Rx8 organisation. No heat spreaders are fitted.

Workstations needing registered ECC memory

Suits IT professionals upgrading a Precision 5820 to its full 128GB capacity for virtualisation, rendering or large datasets. Builders using consumer motherboards, laptops or systems that require unbuffered non-ECC DIMMs cannot use this registered kit. Buyers who need a different capacity or speed should look at other system-specific kits.

Four modules fill every slot

The 4x32GB configuration occupies all four memory channels on the Precision 5820, providing maximum bandwidth for memory-intensive workloads. Registered buffering and ECC protect data integrity during sustained compute tasks. Systems limited to lower densities or unbuffered memory will not accept these modules.

特長

  • 128 GB capacity with four 32 GB modules for large workloads
  • DDR4 2933 speed rated at PC4-23400 for fast data transfer
  • ECC registered RDIMM design protects data integrity in critical tasks
  • 2 V operation reduces power draw and heat output
  • Validated compatibility with Dell Precision 5820 tower workstation

仕様

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (4X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

この商品に関する質問

Will this 288-pin DDR4 kit install in a Dell Precision 5820 tower workstation?

Yes, the kit is built specifically for the Dell Precision 5820 and uses the 288-pin DDR4 RDIMM form factor required by that system.

Can I mix these 2933 MHz registered ECC modules with existing non-ECC UDIMMs in the same machine?

No, registered ECC RDIMMs cannot be combined with unbuffered non-ECC UDIMMs; the memory controller requires matching module types across all populated slots.

How do I confirm the system recognises all 128 GB at 2933 MHz after installation?

Enter the BIOS or UEFI setup on boot and verify the memory summary shows 128 GB total capacity running at 2933 MT/s with ECC active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。