暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro X14SAZ-F memory upgrade

SKU CH-C2JB-K27QF

A 128 GB DDR5 kit of four 32 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X14SAZ-F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 128GB 4X32GB

  • 128 GB total capacity across four 32 GB modules for high-density workloads
  • DDR5 5600 speed delivers rated bandwidth without manual tuning
  • CL46 latency at 1.1 V matches the motherboard's default timing profile
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAZ-F slot layout
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specs

Exact-match DDR5-5600 kit for Supermicro X14SAZ-F

This 128 GB kit delivers four 32 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 timings and 1.1 V operation. The unbuffered, non-ECC 2Rx8 modules match the memory controller requirements of the Supermicro X14SAZ-F motherboard for immediate recognition at full capacity and rated speed.

Sustained-load behaviour with major OEM chips

Modules built from Samsung, Micron or Hynix die are tested for stability at the rated 5600 MT/s, CL46 and 1.1 V. The 2Rx8 organisation supports consistent throughput during extended workloads without downclocking or timing relaxation.

Thermals, noise and power draw in normal use

Bare modules without heat spreaders rely on case airflow and run at the standard 1.1 V DDR5 voltage. Power draw scales with the four-DIMM population, while silent operation is maintained because no active cooling is present on the kit.

特長

  • 128 GB total capacity across four 32 GB modules for high-density workloads
  • DDR5 5600 speed delivers rated bandwidth without manual tuning
  • CL46 latency at 1.1 V matches the motherboard's default timing profile
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAZ-F slot layout
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specs

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1.1V DDR5 5600 kit run hot or draw extra power during all-day workloads?

The modules operate at the standard DDR5 voltage of 1.10V with no heat spreader, so power draw and thermals stay within normal JEDEC limits for 5600 CL46 UDIMMs.

What must my Supermicro X14SAZ-F already have so the 4x32GB kit installs and posts at 128GB?

The board needs four free 288-pin DDR5 UDIMM slots and a BIOS that supports 2Rx8 non-ECC modules at 5600 MT/s; populate all four slots per the manual's population order.

Will the 2Rx8 CL46 sticks work alongside any 1Rx8 DDR5 5600 modules I keep in the other channels?

Mixing 2Rx8 and 1Rx8 ranks on the same motherboard is not guaranteed; the X14SAZ-F memory controller expects identical rank geometry per channel for stable 5600 operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。