暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM Kit

SKU CH-FAVT-QYX2W

A 128 GB kit of eight 16 GB DDR4 UDIMM modules running at 2933 MHz with CL21 latency and 1.20 V operation

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 128GB (8 x 16GB)

  • 128 GB total capacity from eight 16 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • CL21 CAS latency for responsive desktop operation
  • 20 V standard voltage keeps power draw low
  • 288-pin UDIMM form factor fits mainstream motherboards

Capacity and Configuration

This NEMIX RAM kit provides 128 GB across eight 16 GB DDR4 UDIMM modules. It targets desktop workstations and high-capacity PCs that require large memory pools for multitasking or content workloads.

Fit and Alternatives

The kit suits systems with eight DIMM slots that support DDR4 2933 at 1.20 V without ECC. Builds needing ECC, registered modules, or fewer than eight slots should look elsewhere.

Deciding Specification

The decisive figure is the 2933 MT/s speed rating paired with CL21 latency. If the motherboard cannot run DDR4 at this frequency the memory will downclock, so verify platform support before purchase.

特長

  • 128 GB total capacity from eight 16 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • CL21 CAS latency for responsive desktop operation
  • 20 V standard voltage keeps power draw low
  • 288-pin UDIMM form factor fits mainstream motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-628K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 8-module kit fit in a standard four-slot desktop motherboard?

The kit contains eight 16 GB modules for a total of 128 GB. A typical consumer board has four DDR4 slots, so you would need a workstation or server platform with eight UDIMM slots to use all modules at once.

Does the CL21 latency at 2933 MT/s require manual BIOS configuration or will it run automatically?

The modules are rated for DDR4 2933 (PC4 23400) at CL21 and 1.20 V. Most modern motherboards will apply these timings automatically via JEDEC standard profiles, but you should verify the memory QVL for your specific board.

Can I mix these non-ECC unbuffered DIMMs with existing ECC or registered memory?

No. These are non-ECC, unbuffered UDIMMs. Mixing them with ECC or registered modules is not supported and will prevent the system from booting or cause instability.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。