SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501638BTC
在庫あり
NEMIX RAM
NEMIX RAM 128GB DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM THINKMATE 511E-WR 521E-WR memory upgrade
A 128 GB DDR5 4800 CL40 1.1 V 4Rx4 ECC registered DIMM validated for Thinkmate 511E-WR and 521E-WR servers
- Capacity128GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB capacity scales memory-heavy workloads
- DDR5 4800 MT/s throughput accelerates data-intensive tasks
- ECC registered design protects data integrity under load
- 10 V operation reduces server power draw
- Validated for ThinkMate 511E-WR and 521E-WR systems
128 GB DDR5 4800 ECC RDIMM
This single 128 GB DDR5 4800 module delivers registered ECC memory for THINKMATE Supermicro SuperServer 511E-WR and 521E-WR platforms. It operates at 1.1 V with a CL40 latency and a 4Rx4 organisation across 288 pins. The RDIMM form factor ensures signal integrity in multi-module server configurations.
Upgrade from lower-capacity or non-ECC DDR5 RDIMMs
Replacing smaller registered DIMMs with this 128 GB stick increases total memory bandwidth and allows larger datasets to remain in RAM. The jump is worthwhile when workloads exceed the capacity of existing modules or when error correction becomes mandatory for data integrity.
Suited for THINKMATE 511E-WR
IT teams managing these specific SuperServer models gain a validated, stress-tested memory option. Builders using consumer motherboards, non-registered DIMM slots, or systems requiring different speeds, voltages, or form factors should look elsewhere.
特長
- 128 GB capacity scales memory-heavy workloads
- DDR5 4800 MT/s throughput accelerates data-intensive tasks
- ECC registered design protects data integrity under load
- 10 V operation reduces server power draw
- Validated for ThinkMate 511E-WR and 521E-WR systems
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K1 |
| Capacity | 128GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (1X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
この商品に関する質問
Will the 288-pin DDR5 RDIMM fit the memory slots in my THINKMATE 511E-WR or 521E-WR server?
Yes, the module uses the standard 288-pin DDR5 RDIMM form factor required by the THINKMATE 511E-WR and 521E-WR SuperServer platforms.
What is the correct way to install this 128GB registered ECC module, and what step is often missed?
Power down the server, open the chassis, align the module notch with the slot key, press firmly until both retention clips lock, then verify in BIOS that the 4Rx4 rank and CL40 timing are detected.
When should I expect to replace this DDR5 ECC RDIMM in a production server?
The module has no moving parts and runs at 1.1V; replacement is only needed if memory diagnostics report correctable or uncorrectable ECC errors over time.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
