暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 128GB DDR5 6400 4Rx4 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-ZJ27-3EXQS

128 GB DDR5-6400 ECC registered RDIMM validated for the Supermicro X14SRA-F motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity lets you fully populate supported Supermicro servers
  • DDR5 6400 speed with CL52 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the X14SRA-F DIMM slots

128GB DDR5 RDIMM for Supermicro X14SRA-F

This 128GB DDR5-6400 registered ECC module is built for the Supermicro X14SRA-F motherboard. It runs at 1.1V with CL52 latency and a 4Rx4 organisation across 288 pins. The registered design allows full-capacity population while ECC corrects single-bit errors on the fly.

Who this suits and who should look elsewhere

This suits administrators upgrading the named Supermicro platform with the exact rank, voltage and timing the memory controller expects. Builders using consumer boards, UDIMM slots or systems that cannot accept registered ECC DDR5 modules should look elsewhere.

The specification that decides fit

The 4Rx4 registered ECC configuration at 1.1V and CL52 is the single specification that decides whether this module will be recognised at full capacity and run at its rated speed on the target motherboard.

特長

  • 128 GB capacity lets you fully populate supported Supermicro servers
  • DDR5 6400 speed with CL52 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the X14SRA-F DIMM slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard slot and DDR generation does the 288-pin RDIMM require?

The module fits a 288-pin DDR5 RDIMM slot on the motherboard.

Can the 4Rx4 registered ECC modules run in a system that currently uses 2Rx8 unbuffered DIMMs?

No, registered and unbuffered DIMMs cannot be mixed; the board must support 4Rx4 registered ECC DDR5.

How do I confirm the kit is running at 6400 MT/s with CL52 after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify speed DDR5-6400 and latency CL52.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。