暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 260-PIN SODIMM POSIFLEX RT-6015 memory upgrade

SKU CH-PQ94-5PHG6

A 16 GB DDR4 SODIMM running at 2400 MHz with CL17 latency, built for the POSIFLEX RT-6015 terminal

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 upgrade boosts POS terminal responsiveness
  • 2400MHz speed with CL17 latency supports data-intensive tasks
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX RT-6015 slot directly
  • Rigorously stress-tested modules ensure stable 24/7 operation

POSIFLEX RT-6015 memory upgrade

This 16 GB DDR4 SODIMM is built specifically for the POSIFLEX RT-6015 Stylish Slim Terminal. It targets technicians and resellers who maintain point-of-sale kiosks and need a validated module that installs without configuration changes.

260-pin unbuffered design

The module uses a standard 260-pin DDR4 SODIMM edge connector and operates at 1.2 V with CL17 latency. Its unbuffered, non-ECC layout matches the terminal's memory controller, so the upgrade is recognised immediately on POST and requires no BIOS adjustment.

Single-module kit

The package contains one 16 GB stick ranked 2Rx8 using major OEM DRAM from Samsung, Micron or Hynix. No heat spreader is fitted, keeping the profile low enough for the slim chassis, and no additional cables, tools or software are included.

特長

  • 16GB DDR4 upgrade boosts POS terminal responsiveness
  • 2400MHz speed with CL17 latency supports data-intensive tasks
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX RT-6015 slot directly
  • Rigorously stress-tested modules ensure stable 24/7 operation

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

What speed does the DDR4 2400 SODIMM run at in the POSIFLEX RT-6015?

The module operates at DDR4 2400 (PC4-19200) with CL17 latency at 1.2 V, so the terminal's memory controller will cap it at 2400 MT/s.

Will the 260-pin SODIMM fit the RT-6015's memory slot?

Yes, it is a standard 260-pin DDR4 SODIMM (1 × 16 GB, 2Rx8) designed for the POSIFLEX RT-6015 slim terminal.

How do I install the module, and what step is often missed?

Power off and unplug the terminal, open the memory compartment, insert the SODIMM at an angle until the gold contacts disappear, then press down until the side clips click — skipping the click leaves the module loose.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。